We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bundle of 50 green 12 AWG grounding pigtails with captive screws

Ideal

Ideal 30-3392 12 AWG Grounding Pigtail Green PK50

SKU CH-XRY0-Y0T0M

12 AWG solid-wire grounding pigtails with captive thread-forming screws, 8 in, green, 600 V, UL listed, pack of 50

  • Length8"
  • TypeCaptive Screw
  • 12 AWG solid wire handles 600 V circuits reliably
  • Green insulation identifies grounding conductors instantly
  • Captive hex-head screw forms its own threads for fast mounting
  • UL listing confirms compliance with safety standards
  • Pack of 50 pigtails covers multiple job sites

Ideal 30-3392 Grounding Pigtail

The Ideal 30-3392 is a 12 AWG solid wire pigtail designed for grounding connections in electrical installations. Each 8-inch lead comes factory-terminated with a captive thread-forming combination hex head screw coloured green for quick identification. Electricians and maintenance crews use these to bond metal boxes, devices and conduit to the grounding system. The pack contains 50 pieces for jobs that require multiple grounding points.

UL Listed 600-volt rating and steel construction

The pigtail carries a UL Listing and is rated for a maximum of 600 volts, confirming it meets recognised safety standards for branch-circuit grounding. Solid 12 AWG copper conductor provides low-resistance continuity, while the steel screw bites securely into threaded holes without a separate tap. Green insulation and screw head maintain the standard colour code, so inspectors can verify grounding at a glance. No special tools are needed beyond a hex driver or nut runner.

Captive screw simplifies device and box bonding

The captive screw stays attached to the pigtail, preventing lost hardware on the job site and speeding up installation in tight enclosures. Thread-forming tip cuts its own threads in unthreaded holes, eliminating the need for pre-tapped openings in steel boxes or enclosures. Solid wire holds its shape when routed, keeping the grounding path neat and inspectable. Pack of 50 supports both small service calls and larger rough-in projects.

Highlights

  • 12 AWG solid wire handles 600 V circuits reliably
  • Green insulation identifies grounding conductors instantly
  • Captive hex-head screw forms its own threads for fast mounting
  • UL listing confirms compliance with safety standards
  • Pack of 50 pigtails covers multiple job sites

Specifications

BrandIdeal
Length8"
TypeCaptive Screw

Questions about this item

How do I install the captive hex-head grounding screw on the 12 AWG pigtail without stripping the threads?

Drive the captive thread-forming combination hex-head screw straight into the box at low speed; the screw cuts its own threads, so a pilot hole is unnecessary and over-torquing strips the fresh threads.

Will the solid 12 AWG copper conductor or the green insulation need replacement after years in a junction box?

The solid 12 AWG conductor and green insulation are rated for the life of the installation; only the captive grounding screw might need replacement if its threads are damaged during removal.

At what point does the 600 V rating become the limiting factor during sustained load on this grounding pigtail?

The 600 V insulation rating is far above normal circuit voltage, so the first limit under sustained use is the ampacity of the 12 AWG solid copper conductor, not the voltage rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.