IBM
IBM DTLA-307030 (07N5639) 30GB 7200RPM 3.5" IDE Internal Hard Drive
30 GB 3.5" IDE internal hard drive spinning at 7200 RPM for desktop storage
- Capacity30GB
- RPM7200 RPM
- Form Factor3.5"
- 30 GB capacity stores documents and applications
- 7200 RPM spindle speed delivers faster data access
- 5 inch form factor fits standard desktop drive bays
- IDE interface connects to legacy motherboard controllers
- New condition ensures full manufacturer reliability
30GB 7200RPM IDE Hard Drive
The IBM DTLA-307030 is a 30GB internal hard drive spinning at 7200 RPM with a 3.5 inch form factor. It connects via an IDE interface and arrives as a new bare drive. This unit suits legacy desktops or industrial equipment that require this specific interface and physical size.
Suits older IDE systems only
This drive fits machines built for 3.5 inch IDE storage where 30GB capacity meets the requirement. It is not for laptops or compact devices needing 2.5 inch drives, nor for builds that demand higher capacities or faster transfer rates than this model provides.
IDE interface decides compatibility
The IDE connector is the single specification that determines whether this drive works in a given system. Motherboards or controllers without a matching IDE port cannot use this drive regardless of capacity or spindle speed.
Highlights
- 30 GB capacity stores documents and applications
- 7200 RPM spindle speed delivers faster data access
- 5 inch form factor fits standard desktop drive bays
- IDE interface connects to legacy motherboard controllers
- New condition ensures full manufacturer reliability
Specifications
| Brand | IBM |
|---|---|
| Model | DTLA-307030 (07N5639) |
| Capacity | 30GB |
| RPM | 7200 RPM |
| Form Factor | 3.5" |
Questions about this item
Does the 3.5" DTLA-307030 need a desktop IDE controller to operate?
Yes, the 3.5 inch form factor and IDE interface require a standard desktop 40-pin IDE controller and matching power connector.
Will the 7200 RPM DTLA-307030 work on the same IDE channel as an older 30GB drive?
The drive uses a standard IDE interface so it can share a cable with another IDE device when jumpered correctly.
How can I confirm the 307030 is running at 7200 RPM after installation?
The BIOS will report the model DTLA-307030 and a 30GB capacity; SMART data or a diagnostic utility will show the 7200 RPM spindle speed.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
