HYCHIKA HS17K 19 PCS Hole Saw Kit 3/4" to 5" (19mm-127mm)
19-piece carbon-steel hole-saw set cuts 19 mm to 127 mm holes in soft wood, PVC, plywood and drywall, with two mandrels, drill bits, hex key and case
- Size/Dimensions6
- MaterialSteel
- Selling UnitSet
- Color/FinishHole Saw Kit
- FeaturesCompact
- Item Count19, Hole saw set, Compact
- 13 carbon-steel blades cover 19 mm to 127 mm diameters
- Heat-treated steel with black oxide resists rust and wear
- Spiral grooves clear chips for smooth, clog-free cuts
- Two mandrels, two drill bits, plate and hex key included
- Compact 5.588 cm x 15.2908 cm x 20.9042 cm case weighs 1.161 kg
19-Piece Carbon Steel Hole Saw Kit
The HYCHIKA HS17K kit provides 13 carbon steel hole saws ranging from 3/4 inch to 5 inches (19 mm to 127 mm). It includes two mandrels, two drill bits, an installation plate, a hex key, and a compact storage case. The set is designed for cutting soft wood, plywood, drywall, PVC board, and plastic materials.
DIY users cutting soft materials.
This kit suits homeowners and DIY enthusiasts making holes in furniture, doors, or table tops using soft wood, plywood, drywall, or PVC. The carbon steel blades with black oxide finish resist rust during occasional use. Buyers who need to cut metal, hardwood, or other hard materials should look at a different tool because this set is not suitable for those applications.
Simple mandrel attachment with included hex key
Installation requires securing a hole saw onto one of the two supplied mandrels using the provided hex key, then inserting the drill bit. The compact case keeps the 19 pieces organised for transport. A common issue is the pilot bit wandering on very smooth surfaces, so starting at a low speed helps maintain accuracy. The spiral grooves assist with chip removal to reduce clogging during cuts.
Highlights
- 13 carbon-steel blades cover 19 mm to 127 mm diameters
- Heat-treated steel with black oxide resists rust and wear
- Spiral grooves clear chips for smooth, clog-free cuts
- Two mandrels, two drill bits, plate and hex key included
- Compact 5.588 cm x 15.2908 cm x 20.9042 cm case weighs 1.161 kg
Specifications
| Brand | HYCHIKA |
|---|---|
| Model | HS17K |
| Size/Dimensions | 6 |
| Material | Steel |
| Selling Unit | Set |
| Color/Finish | Hole Saw Kit |
| Features | Compact |
| Item Count | 19, Hole saw set, Compact |
| Commercial/Residential | Compact |
| Part Number | HS17K |
Questions about this item
What size drill chuck is needed for the 1/2 inch mandrel included in this kit?
The 1/2 inch mandrel requires a drill chuck that opens to at least 1/2 inch or 13 mm. Most standard 1/2 inch corded or cordless drills will accept it directly.
Can the carbon steel saw blades cut through the same hardwoods I use with my older bi-metal hole saws?
No. This kit is designed for soft wood, plywood, drywall, PVC board and plastic. It is not suitable for metal or hardwood, so keep your bi-metal saws for those materials.
How do I verify the hole diameter matches the 3/4 inch to 5 inch range after cutting?
Measure the finished hole with a tape measure or caliper. The 13 included blades are sized from 19 mm (3/4 inch) up to 127 mm (5 inches), so the cut hole should match the blade size stamped on the side.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
