We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Straight silver aluminium liquid-tight connector 1-1/2in MNPT

Hubbell Incorporated

Hubbell Incorporated SHC1058 Liquid Tight Connector 1-1/2in Straight video accessory

SKU CH-J124-YSA3W

Connects 1.13 in to 1.25 in cords to a 1 1/2 in MNPT box with straight aluminum body and CSA LR27378, UL E54218 listings

  • TypeCable Management & Conduit
  • ColorSilver
  • Fits 1.13 to 1.25 in cords for secure sealing
  • Straight 1-1/2 in MNPT body simplifies box mounting
  • Aluminium construction resists corrosion in damp locations
  • CSA LR27378 and UL E54218 listings confirm code compliance
  • No external strain relief keeps profile compact for tight runs

Liquid Tight Connector 1-1/2in

The Hubbell SHC1058 is a straight liquid-tight cord connector built for 1-1/2 inch male NPT box entries. It accepts a single cable with a diameter between 1.13 in and 1.25 in. The aluminium body provides a secure termination point for conduit or cable in industrial and commercial installations. This new accessory is designed for straightforward cable management where environmental sealing is required.

Cord diameter range 1.13 to 1.25 in

The connector only fits cords within the stated 1.13 in to 1.25 in diameter window; cables outside this range cannot be sealed properly. No external strain relief is included, so the cable must be supported separately to prevent tension on the gland. The 1 11/16 in length from box face to connector end determines the protrusion inside the enclosure. Compliance is listed to CSA LR27378 and UL E54218 standards.

Aluminium body silver finish

The silver aluminium construction resists corrosion in damp or outdoor locations while remaining lightweight for overhead runs. A straight body style keeps the cable run linear, simplifying layout in tight wireways or junction boxes. The lack of external strain relief means installers must plan for cable support clamps nearby. The connector is sold individually for single-cable entry points.

Highlights

  • Fits 1.13 to 1.25 in cords for secure sealing
  • Straight 1-1/2 in MNPT body simplifies box mounting
  • Aluminium construction resists corrosion in damp locations
  • CSA LR27378 and UL E54218 listings confirm code compliance
  • No external strain relief keeps profile compact for tight runs

Specifications

BrandHUBBELL WIRING DEVICE-KELLEMS
TypeCable Management & Conduit
ColorSilver

Questions about this item

Should I pick the 1.13 in or 1.25 in cord diameter version of the SHC1058?

This connector accepts cords from 1.13 in up to 1.25 in, so choose based on the actual cable you are running; both limits are covered by the same unit.

What does the 1 11/16 in box-to-end length mean when the fitting is installed?

It measures 1 11/16 in from the 1-1/2 in MNPT box connection to the connector tip, giving the exact protrusion into your enclosure.

How do the CSA LR27378 and UL E54218 listings limit the way I can use this straight liquid-tight connector?

They certify the aluminum body for liquid-tight service with a single cord in the 1.13–1.25 in range, so the installation must stay within that cord diameter and the 1-1/2 in MNPT thread.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.