Hubbell Incorporated
Hubbell Incorporated PT153112P Outlet Strip Switched 6 5-15R 5-15P 15A 125V 6ft 14AWG White
Switched outlet strip provides six NEMA 5-15R receptacles on a 6 ft, 14 AWG cord with a 15 A, 125 V rating
- TypeWire & Cable
- ColorWhite
- Six grounded outlets power multiple devices from one strip
- Illuminated on/off switch controls all outlets at once
- Six-foot 14 AWG cord reaches distant workbench power
- Screw-through base or clip mounting secures strip firmly
- Rated 15 A at 125 V AC for standard loads
Workbench power strip
The Hubbell PT153112P outlet strip provides six NEMA 5-15R receptacles on a 12-inch centre spacing. A single illuminated rocker switch controls all outlets from the 5-15P plug. The 6-foot 14 AWG cord carries 15 A at 125 V AC. Screw-through-base or clip mounting suits workbenches and cabinets.
Replaces basic multi-outlet extensions
Builders who need individual outlet switching or surge protection will not find those features here. The strip adds a master on-off control and wider outlet spacing for transformer blocks compared with un-switched units. Medical-facility use is not permitted.
Sustained load behaviour
The 14 AWG conductors and 15 A rating support continuous operation at full capacity without derating. The PVC housing and three-conductor cord maintain temperature rise within NEMA limits during extended runs. No power indicator means the switch position is the only visual confirmation of live status.
Highlights
- Six grounded outlets power multiple devices from one strip
- Illuminated on/off switch controls all outlets at once
- Six-foot 14 AWG cord reaches distant workbench power
- Screw-through base or clip mounting secures strip firmly
- Rated 15 A at 125 V AC for standard loads
Specifications
| Brand | HUBBELL WIRING DEVICE-KELLEMS |
|---|---|
| Type | Wire & Cable |
| Color | White |
Questions about this item
Does the 12 in. outlet centre distance fit standard workbench cut-outs?
The outlets are spaced 12 in. apart on a single row, so the strip matches typical 12 in. on-centre bench openings.
Which mounting method is easier — the screw-through base or the supporting clip?
Both are supplied; the screw-through base gives a permanent fix while the clip allows tool-free removal, so choose based on whether you need portability.
When should the 14 AWG cord be inspected or replaced?
Check the 6 ft 14 AWG cord periodically for cuts, abrasion or heat damage; replace it if the insulation is compromised or the plug blades become loose.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



