Hubbell Incorporated
Hubbell Incorporated NHC1036CR Liquid Tight Connector 3/4in 90 deg Brown
Liquid-tight cord connector accepts 0.50 to 0.63 inch cables with a 90-degree turn and 3/4 inch MNPT box connection
- TypeCable Management & Conduit
- ColorBrown
- 90-degree angle simplifies routing in tight spaces
- Brown gland colour enables quick visual identification
- Accepts cord diameters from .50 to .63 inches
- Insulated nylon body protects conductors from damage
- UL E54218 and CSA LR27378 listed for safety compliance
Purpose and fit
This Hubbell liquid-tight cord connector accepts a single cable between .50 in and .63 in diameter and threads onto a 3/4 in MNPT box entry. The 90-degree nylon body routes the cord at a right angle while the brown gland identifies the clamping range at a glance. It is suited for installers who need a watertight seal where flexible cord enters an enclosure.
What to verify
Confirm that the cord you plan to use falls within the .50 in to .63 in diameter range so the gland can seal correctly. Ensure the enclosure provides a 3/4 in MNPT threaded opening and that the 1 5/8 in overall length clears any internal obstructions. The connector is insulated and carries CSA LR27378 and UL E54218 listings for code compliance.
Build and daily use
The gray nylon body resists corrosion and impact in damp or outdoor locations, and the integrated strain relief grips the cord without an external clamp. Because the gland is moulded in brown, technicians can spot the correct size quickly during inspection or maintenance. The fixed 90-degree angle keeps the cable close to the box, reducing snag risk in tight conduit runs.
Highlights
- 90-degree angle simplifies routing in tight spaces
- Brown gland colour enables quick visual identification
- Accepts cord diameters from .50 to .63 inches
- Insulated nylon body protects conductors from damage
- UL E54218 and CSA LR27378 listed for safety compliance
Specifications
| Brand | HUBBELL WIRING DEVICE-KELLEMS |
|---|---|
| Type | Cable Management & Conduit |
| Color | Brown |
Questions about this item
What cords fit the 0.50 in to 0.63 in diameter range on the NHC1036CR?
The connector accepts a single cord with an outer diameter between 0.50 in and 0.63 in. No external strain relief is included or required.
When should I choose the 90-degree brown version over a straight connector?
Choose the 90-degree style when the cable must turn sharply at a 3/4 in MNPT enclosure entry, and the brown gland colour matches your coding scheme.
How far does the 1 5/8 in box-to-end length protrude inside the cabinet?
The connector extends 1 5/8 in from the 3/4 in MNPT threads into the enclosure, so allow that clearance when routing the cord to terminals.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



