We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brown nylon 90-degree liquid-tight connector with gray body

Hubbell Incorporated

Hubbell Incorporated NHC1024CR Liquid Tight Connector 1/2in 90 deg Brown

SKU CH-X4H7-5TEF0

A 90-degree liquid-tight cord connector for 1/2 in MNPT boxes, accepting .50 to .63 in cable diameters with insulated nylon construction

  • TypeStrain Relief
  • ColorBrown
  • 90-degree angle routes cables in tight spaces
  • Accepts cords from .50 to .63 in diameter
  • Nylon body resists corrosion and impact
  • 1/2 in MNPT thread fits standard knockouts
  • CSA and UL listed for code compliance

Liquid-Tight Cord Connector

The Hubbell NHC1024CR is a 90-degree liquid-tight cord connector designed to secure and seal a single cable where it enters a 1/2-inch MNPT threaded enclosure. It accepts cord diameters from .50 to .63 inches and provides strain relief without an external strain-relief component. The nylon body and brown gland are insulated and carry CSA LR27378 and UL E54218 listings.

Verify Enclosure Thread and Cable Diameter

Confirm that the mounting location has a 1/2-inch MNPT thread and that the cable you plan to route falls within the .50-to-.63-inch diameter range. The connector adds 1 7/16 inches from the box face to the end of the fitting, so ensure adequate internal clearance for the 90-degree bend. No external strain-relief hardware is included or required.

Suits Single-Cable Watertight Entries

This connector suits installers who need a compact, insulated 90-degree seal for one cable in a wet or dusty environment. It is not intended for multiple cables, for cables outside the stated diameter range, or for applications that require an external strain-relief device or a straight-through fitting.

Highlights

  • 90-degree angle routes cables in tight spaces
  • Accepts cords from .50 to .63 in diameter
  • Nylon body resists corrosion and impact
  • 1/2 in MNPT thread fits standard knockouts
  • CSA and UL listed for code compliance

Specifications

BrandHubbell Wiring Device-Kellems
ModelNHC1024CR
TypeStrain Relief
ColorBrown

Questions about this item

What comes in the box and do I need to buy a locknut or sealing washer separately?

The connector is supplied as a single brown nylon unit with an insulated throat and integral gland for cord diameters .50 to .63 in. A 1/2 in. locknut and any required sealing washer are not included and must be sourced separately.

Should I choose the brown gland version or is another colour coded for a different cord range?

The brown gland colour code identifies this model for the .50 to .63 in. cord range; other colour codes correspond to different ranges, so select the brown version only when your cable falls within that span.

What does the 90 degree angle mean for routing inside a tight enclosure?

The 90 degree style turns the cable 16 in. from the box entry, allowing the cord to run parallel to the enclosure wall and reducing the bend radius needed in confined spaces.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.