Hubbell Incorporated
Hubbell Incorporated KILLARK 2FS-3 Electrical Box 1" Hub 32.0 cu in
Two-gang aluminum device box with one 1-inch hub and 32 cu in capacity
- TypeElectrical Boxes
- 32 cu in capacity fits more wiring
- Two-gang box supports dual-device installations
- 1 in hub size matches standard conduit
- Aluminum construction resists corrosion
- Internal grounding screw simplifies safe bonding
Two-gang FS aluminum box
The Hubbell Killark 2FS-3 is a two-gang FS device box made from aluminum with a gray finish. It provides a 32.0 cu in internal capacity for wiring devices and splices. A single 1 in hub allows conduit entry. The unit suits industrial or commercial installations requiring a durable metallic enclosure.
Sustained load behavior
Aluminum construction dissipates heat from enclosed conductors more effectively than non-metallic alternatives during continuous operation. Tapered threads on the hub create a tight seal that resists loosening under vibration or thermal cycling. The internal grounding screw maintains a permanent low-impedance path for fault current over the service life.
Installation and common issues
Mounting holes are spaced 1 in on centre for direct surface attachment. The box measures 4.62 in long, 4.56 in wide and 2 in deep, so verify cavity space before cutting. Installers sometimes forget to remove the internal grounding screw when using self-grounding devices, creating a double ground.
Highlights
- 32 cu in capacity fits more wiring
- Two-gang box supports dual-device installations
- 1 in hub size matches standard conduit
- Aluminum construction resists corrosion
- Internal grounding screw simplifies safe bonding
Specifications
| Brand | KILLARK |
|---|---|
| Type | Electrical Boxes |
Questions about this item
How much heat does the KILLARK 2FS-3 generate when energized all day?
The aluminum box itself produces no heat; temperature rise depends on the devices and conductors installed inside the 32 cu in volume.
What mounting hardware must I already have to install this 4.62 in by 4.56 in box?
You need fasteners suited to the 1 in on‑center mounting holes and a 1 in conduit fitting for the single tapered‑thread hub.
Will my existing 1 in rigid conduit thread directly into the 2FS-3 hub?
Yes, the hub has tapered threads sized for 1 in trade‑size conduit, so standard rigid or IMC conduit screws in without an adapter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Thomas & Betts TY523M Cable Tie 18lb 4in Natural Nylon Stainless Steel Locking Clip Pack 100
CALBRITE S60700FDCC Weatherproof Electrical Box 5.90" x 2.83" 25 cu in
- Electrical Boxes &…
HOFFMAN A12P10G Interior Panel Steel 10.75in H 8.88in W 14 Gauge
- Electrical Boxes &…



