We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red IEC pin and sleeve receptacle with Zytel nylon body

Hubbell Incorporated

Hubbell Incorporated HBL320R7W IEC Pin and Sleeve Receptacle 20A 480V Red video accessory

SKU CH-44F2-M8QEC

Watertight IEC pin-and-sleeve receptacle rated 20 A, 480 V AC with Zytel 101 nylon body, two poles, three wires and red colour coding

  • TypeLight Switch
  • ColorRed
  • Watertight IEC pin-and-sleeve receptacle rated for 480 V AC
  • Abuse-resistant Zytel 101 nylon body withstands harsh environments
  • 20 A, 3-wire, 2-pole configuration for single-phase power
  • UL Listed E146032 and CSA Certified LR285C for code compliance
  • Meets IEC 60309-1 and 60309-2 international standards

IEC Pin and Sleeve Receptacle 20 A 480 V AC

This red IEC pin and sleeve receptacle is rated for 20 A at 480 V AC in a single-phase, 2-pole, 3-wire configuration. It suits industrial and commercial power-distribution points that require a watertight, abuse-resistant connection.

Thermals noise and power draw

The Zytel 101 nylon body resists heat and mechanical abuse without active cooling, so the device runs silently and draws no power of its own. Normal operation adds no audible noise or thermal load to the installation.

IEC 60309-1 and 60309-2 compliance

UL listing E146032 and CSA certification LR285C confirm the receptacle meets the IEC 60309 standards for pin and sleeve couplers. Buyers who need a different voltage rating, pole count, or non-IEC grounding style cannot use this part.

Highlights

  • Watertight IEC pin-and-sleeve receptacle rated for 480 V AC
  • Abuse-resistant Zytel 101 nylon body withstands harsh environments
  • 20 A, 3-wire, 2-pole configuration for single-phase power
  • UL Listed E146032 and CSA Certified LR285C for code compliance
  • Meets IEC 60309-1 and 60309-2 international standards

Specifications

BrandHUBBELL WIRING DEVICE-KELLEMS
TypeLight Switch
ColorRed

Questions about this item

How do I wire the HBL320R7W receptacle and which step is most often missed?

Connect the three wires to the 20 A, 480 V AC terminals following the IEC 60309-1 pinout, then torque the gland nut to seal the Zytel 101 nylon body — the step most often missed is fully tightening that gland nut for the watertight seal.

What maintenance will the HBL320R7W need over time?

Inspect the Zytel 101 nylon housing and IEC grounding contacts periodically for cracks, discoloration or corrosion; replace the receptacle if the abuse-resistant body shows damage or the 20 A / 480 V AC rating markings become illegible.

What is the first limit reached when the HBL320R7W runs continuously at full load?

The 20 A, 480 V AC continuous current rating is the primary limit; sustained operation at that level will heat the Zytel 101 nylon body and IEC contacts until the thermal ceiling of the UL 146032 listing is reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.