Hubbell Incorporated
Hubbell Incorporated HAWA SG1-20-PCU LED wall pack 5000K 2263 lm 20W
Outdoor LED wall pack delivers 2263 lumens at 5000K with a built-in photocontrol and IP65-rated aluminum housing
- Bright 5000K illumination with 2263 lumens output
- Energy efficient at 108 lumens per watt consumption
- Photocontrol sensor enables automatic dusk-to-dawn operation
- IP65 rated for wet location outdoor durability
- Replaces 70W metal halide fixtures at 20W
Outdoor LED wall pack for area lighting
The Hubbell HAWA SG1-20-PCU delivers 2263 lumens at 5000 K from a 20 W LED engine. Bronze aluminium housing with impact-resistant tempered glass suits building perimeters, loading docks and walkways. Integrated photocontrol activates the fixture automatically at dusk. UL 1598 wet-location listing and IP65 rating confirm suitability for exposed exterior mounting.
Thermal and electrical characteristics
Operating voltage spans 120 to 277 V AC for direct connection to common commercial supplies. Efficacy of 108 lm/W limits waste heat while replacing 70 W metal-halide or high-pressure sodium units. Photocontrol sensor reduces unnecessary runtime, further lowering energy draw. Housing colour and material are specified for corrosion resistance in outdoor environments.
Sustained-load behaviour
Continuous dusk-to-dawn operation is supported by the 5-year warranty period. Recommended mounting height of 10 to 12 ft optimises Type III distribution uniformity over time. IP65 seal maintains ingress protection through thermal cycling and weather exposure. Aluminium housing and tempered glass lens retain optical performance without degradation under prolonged use.
Highlights
- Bright 5000K illumination with 2263 lumens output
- Energy efficient at 108 lumens per watt consumption
- Photocontrol sensor enables automatic dusk-to-dawn operation
- IP65 rated for wet location outdoor durability
- Replaces 70W metal halide fixtures at 20W
Specifications
| Brand | Hubbell Lighting - Outdoor |
|---|
Questions about this item
How do I wire the 120 to 277V AC supply to the fixture, and what step is often missed?
Connect line, neutral and ground to the driver leads inside the housing, then seal the gasketed wiring compartment — installers often forget to torque the cover screws to spec, breaking the IP65 seal.
Which component will need replacement first, and when?
The LED engine is rated for long life; the photocontrol sensor typically fails before the LEDs and should be checked after five years.
What thermal or electrical limit appears first during continuous dusk-to-dawn operation?
The driver’s maximum case temperature is the limiting factor; sustained output at 20 W in a sealed IP65 housing can reach that threshold before lumen depreciation becomes noticeable.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



