We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brown nylon duplex GFCI receptacle with test and reset buttons

Hubbell Incorporated

Hubbell Incorporated GFR20 GFCI Receptacle 20A 125V 5-20R Brown

SKU CH-7X47-JAJ7R

A 20 A, 125 V GFCI duplex receptacle with a brown nylon housing and straight 5-20R configuration

  • TypeWiring Devices
  • GFCI protection cuts power on ground faults
  • 20 A rating supports heavy-duty 125 V loads
  • Brown nylon housing resists impact and chemicals
  • Flush-mount single-gang design fits standard boxes
  • Meets NEC standards for code-compliant installs

GFCI Receptacle for 20 A Circuits

This Hubbell Incorporated GFR20 GFCI receptacle provides ground-fault protection on 20-ampere, 125-volt AC circuits. It is intended for electricians and facility managers who need a NEC-compliant device for residential or light-commercial wiring. The brown nylon housing fits a standard single-gang flush-mount box. The duplex 5-20R configuration accepts both straight-blade and horizontal-neutral plugs.

Flush Mount with Nylon Housing

The straight-orientation terminals accept three conductors for line, neutral and ground connections. A flush-mount design sits level with the wall surface when installed in a compatible box. The nylon housing carries a NEMA 1 enclosure rating for indoor use and resists impact during installation. No cover plate is included, so a separate 5-20R cover must be sourced to complete the installation.

Ready for Immediate Wiring

The receptacle ships as a single unit with factory-calibrated GFCI circuitry, eliminating the need for field adjustment. Polarised slots and a grounded mounting strap simplify correct conductor placement during rough-in. Compliance with NEC standards means the device meets the baseline safety requirements inspectors look for on 20-ampere branch circuits.

Highlights

  • GFCI protection cuts power on ground faults
  • 20 A rating supports heavy-duty 125 V loads
  • Brown nylon housing resists impact and chemicals
  • Flush-mount single-gang design fits standard boxes
  • Meets NEC standards for code-compliant installs

Specifications

BrandHUBBELL WIRING DEVICE-KELLEMS
TypeWiring Devices

Questions about this item

What does the 5-20R NEMA configuration cap in practice?

The 5-20R NEMA configuration is rated for 20 A at 125V AC on a single-phase circuit and provides GFCI protection.

What physical space does this duplex receptacle need to fit and mount?

It is a single-gang flush-mount device with a nylon housing that fits a standard wall box and uses a straight connection orientation.

How is it wired, and which step do installers often get wrong?

Connect the three wires to the line and load terminals following the NEC-compliant wiring diagram, ensuring line and load are not reversed so downstream protection works.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.