Hubbell Incorporated
Hubbell Incorporated FS-3M 1-Gang Device Box 32.0 cu in
A single-gang malleable iron device box with 32.0 cu in capacity, 1 in hub, internal grounding screw and tapered threads
- TypeElectrical Boxes
- 1-gang box with 32.0 cu in capacity for ample wiring space
- Malleable iron construction provides durable protection in harsh environments
- Gray finish resists corrosion for long-lasting outdoor use
- Tapered threads ensure secure conduit connections
- Internal grounding screw simplifies safe installation
Single-Gang FS Box for Conduit Runs
The Hubbell Killark FS-3M is a one-gang malleable iron device box rated at 32.0 cu in capacity. It accepts a single 1 in conduit entry and includes an internal grounding screw for secure bonding. The gray finish suits industrial and commercial installations.
Suits Rigid Conduit Systems Not Cable Tray
This box suits electricians pulling rigid or IMC conduit into a single device location where tapered threads are required. It is not for installers needing multiple gangs, larger cubic-inch capacity, or non-metallic cable clamps. Builders using EMT without threaded hubs should look at other styles.
Threaded Hub Mounting With Fixed Depth
Installation means threading the 1 in conduit directly into the tapered hub and securing the box via 1.0 in on-centre mounting holes. The 2.0 in depth and 4.62 in by 2.87 in footprint are fixed, so verify enclosure space before rough-in. Malleable iron resists impact but requires proper thread engagement to maintain ground continuity.
Highlights
- 1-gang box with 32.0 cu in capacity for ample wiring space
- Malleable iron construction provides durable protection in harsh environments
- Gray finish resists corrosion for long-lasting outdoor use
- Tapered threads ensure secure conduit connections
- Internal grounding screw simplifies safe installation
Specifications
| Brand | HUBBELL KILLARK |
|---|---|
| Type | Electrical Boxes |
Questions about this item
Does this 1-gang box need a specific cover or mounting hardware to work?
It has 1.0 in on-centre mounting holes and tapered 1 in hub threads, so a matching FS-series cover and conduit fittings will secure it.
Can I run existing 1-inch rigid conduit into the 1 in hub on this gray malleable-iron box?
Yes, the 1 in tapered threads accept standard 1-inch conduit, and the 32.0 cu in capacity leaves room for the wires you pull through.
How do I confirm the internal grounding screw is properly connected after installation?
After wiring, verify continuity between the grounding screw and the metal conduit system with a tester; the malleable-iron body provides the ground path.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Thomas & Betts TY523M Cable Tie 18lb 4in Natural Nylon Stainless Steel Locking Clip Pack 100
CALBRITE S60700FDCC Weatherproof Electrical Box 5.90" x 2.83" 25 cu in
- Electrical Boxes &…
HOFFMAN A12P10G Interior Panel Steel 10.75in H 8.88in W 14 Gauge
- Electrical Boxes &…



