We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 90-degree aluminum cord grip with stainless steel mesh strain relief

Hubbell Incorporated

Hubbell Incorporated 074-01-076 Strain Relief Cord Grip Male 90 Degree video accessory

SKU CH-WS0S-7FHE9

A liquid-tight 90-degree cord grip provides strain relief for cables 0.25 to 0.38 in diameter with a 1/2 in MNPT connection

  • TypeLiquid-Tight
  • Length11.000
  • ColorTransparent
  • Weight0.1
  • 90-degree angle eases routing in tight spaces
  • Liquid-tight seal protects against moisture ingress
  • Stainless-steel mesh grip prevents cable pull-out
  • CSA and UL listed for code compliance
  • Aluminium body resists corrosion in harsh environments

Hubbell 074-01-076 Liquid-Tight Cord Grip

This Hubbell Wiring Device-Kellems connector provides a 90-degree liquid-tight seal for a single cord. It accepts diameters from .25 in to .38 in and connects via a 1/2 in MNPT thread. The aluminium body and stainless-steel mesh grip deliver strain relief in wet or oily environments. It is a new component rated to CSA and UL standards.

Replaces worn or missing 90-degree gland fittings

Install this grip when an existing straight or damaged connector no longer seals against moisture or protects the cable from pull-out forces. The 90-degree style is worth the change when routing space is tight and the cord must turn sharply at the enclosure entry. The mesh strain relief adds grip length without increasing the overall profile.

Verify cord diameter and thread compatibility

Confirm the cable outer diameter falls between .25 in and .38 in before ordering. Ensure the enclosure provides a 1/2 in MNPT female opening for the male thread. Check that the 11.000 length and 90-degree bend suit the internal wiring layout and available clearance. The connector is not insulated, so grounding continuity relies on the metal-to-metal contact.

Highlights

  • 90-degree angle eases routing in tight spaces
  • Liquid-tight seal protects against moisture ingress
  • Stainless-steel mesh grip prevents cable pull-out
  • CSA and UL listed for code compliance
  • Aluminium body resists corrosion in harsh environments

Specifications

BrandHubbell Wiring Device-Kellems
Model074-01-076
TypeLiquid-Tight
Length11.000
ColorTransparent
Weight0.1

Questions about this item

What cord diameter range does the 90-degree cord grip accept?

The connector handles cords from .25 in to .38 in diameter, with a single-cord mesh strain relief that extends 3 5/8 in beyond the body.

How does the 1/2 in MNPT box connection install, and what step is often missed?

Thread the aluminum body into a 1/2 in MNPT opening, then tighten the gland nut to compress the mesh grip — skipping that compression leaves the cord unsecured.

When should the mesh strain relief or gland nut be replaced?

Replace them if the stainless-steel mesh shows broken strands, the gland nut threads strip, or the transparent gland cracks, since any damage compromises the liquid-tight seal.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.