We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent wire mesh cable support grip with eye loop, 1.50 to 1.74in range

Hubbell Incorporated

Hubbell Incorporated 02203019 Cable Support Grip 1.50-1.74in video accessory

SKU CH-Y3GK-52HBD

Supports cables 1.50 to 1.74 inches with 1,610 lb breaking strength and 15 1/2 inch mesh

  • TypeCable Management & Conduit
  • ColorTransparent
  • Cable diameter range 1.50 to 1.74 in fits specific sizes
  • Breaking strength 1,610 lb handles heavy loads
  • Tin-coated bronze material resists corrosion
  • CSA certified meets safety standards
  • 12 in eye length simplifies installation

Cable Support Grip for 1.50–1.74 in cables

The Hubbell Incorporated 02203019 Cable Support Grip is a tin-coated bronze device designed to secure single cables with diameters between 1.50 in and 1.74 in. It suits installers managing heavy cable runs in commercial or industrial environments where reliable strain relief is required. The eye-style design provides a fixed anchor point for overhead or vertical routing.

Check cable diameter and mounting point

Verify that the cable outer diameter falls within the 1.50 in to 1.74 in range before ordering. Confirm the structure can accommodate a 12 in eye length and support the 1,610 lb breaking strength rating. Ensure the mounting hardware matches the eye configuration for a secure attachment.

Tin-coated bronze mesh adds corrosion resistance

The 15 1/2 in mesh length distributes tension evenly along the cable jacket to prevent damage during pulls. Tin-coated bronze construction resists corrosion in damp or outdoor locations. CSA certification confirms compliance with applicable safety standards for cable management accessories.

Highlights

  • Cable diameter range 1.50 to 1.74 in fits specific sizes
  • Breaking strength 1,610 lb handles heavy loads
  • Tin-coated bronze material resists corrosion
  • CSA certified meets safety standards
  • 12 in eye length simplifies installation

Specifications

BrandHUBBELL WIRING DEVICE-KELLEMS
TypeCable Management & Conduit
ColorTransparent

Questions about this item

What comes with the Hubbell 02203019 cable support grip and is any extra hardware needed?

The grip ships as a single tin-coated bronze unit with an eye style and rod-closing mesh; mounting hardware such as bolts or brackets is not included and must be sourced separately.

How do I choose the correct grip for my cable diameter?

Select this model only when the cable outside diameter falls between 1.50 in and 1.74 in; cables outside that range require a different grip size.

What does the 610 lb breaking strength mean for a real installation?

It is the maximum tensile load the mesh can withstand before failure; the working load in service should be kept well below that figure with an appropriate safety factor.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.