HPE
HPE C8S62A 1TB 2.5" 7200 RPM SAS 6G Dual Port Midline Hot Swap internal hard drive
A 1 TB 2.5-inch midline SAS hard drive spinning at 7200 RPM with dual-port 6 Gb/s connectivity for hot-swap server bays
- InterfaceSAS 6Gb/s
- Capacity1TB
- RPM7200 RPM
- Form Factor2.5"
- 1TB capacity for midline storage workloads
- 7200 RPM spindle speed enables fast data access
- SAS 6Gb/s dual-port interface provides path redundancy
- 5-inch small form factor fits dense server bays
- Hot-swap carrier allows drive replacement without downtime
1TB 2.5" SAS Hard Drive
The HPE C8S62A is a 1TB midline hard drive built for servers and storage arrays that need reliable capacity in a small form factor. Its 7200 RPM spindle and dual-port SAS 6Gb/s interface suit mixed workloads where consistent throughput matters more than peak speed.
Capacity and workload fit
One terabyte provides room for operating systems, databases and archival data on a single spindle. The 7200 RPM rotation handles sequential reads and moderate random I/O well, while the 6Gb/s SAS link keeps the bus from becoming a bottleneck under typical enterprise loads.
Carrier and connectivity
A hot-swap 2.5" SFF carrier lets technicians replace the drive without powering down the chassis. Dual SAS ports give path redundancy to the controller or expander, so a single cable or port failure does not take the volume offline.
Highlights
- 1TB capacity for midline storage workloads
- 7200 RPM spindle speed enables fast data access
- SAS 6Gb/s dual-port interface provides path redundancy
- 5-inch small form factor fits dense server bays
- Hot-swap carrier allows drive replacement without downtime
Specifications
| Brand | HP |
|---|---|
| Part Number | C8S62A |
| Interface | SAS 6Gb/s |
| Capacity | 1TB |
| RPM | 7200 RPM |
| Form Factor | 2.5" |
Questions about this item
Will this 2.5-inch SAS 6Gb/s drive work in a server that currently uses 3.5-inch SAS drives?
The drive uses a 2.5-inch small form factor and SAS 6Gb/s interface. It fits 2.5-inch hot-swap bays; a 3.5-inch bay requires a carrier adapter, which is not included.
How can I confirm the 7200 RPM midline drive is operating correctly after installation?
The drive reports its model C8S62A, 1TB capacity and SAS 6Gb/s link speed in the server BIOS or RAID controller utility. SMART data will show 7200 RPM spindle speed and dual-port status.
Does the C8S62A ship with a hot-swap carrier or tray, or must I buy one separately?
The drive is supplied as a bare 2.5-inch mechanism without a carrier. A compatible HPE hot-swap carrier or tray for your specific server model must be purchased separately.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
