We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
HPE Aruba 6300F 48-port 1GbE Class 4 PoE 4-port SFP56 switch front view

HPE

HPE Aruba 6300F 48-Port 1GbE Class 4 PoE 4-Port SFP56 Switch

SKU CH-572E-C63FS

48-port 1GbE switch with Class 4 PoE up to 30W per port and four SFP56 uplinks supporting 10G, 25G and 50G speeds

  • Switch TypeEthernet Switch
  • ProtocolsHCRP, SPP
  • Weight1
  • 48 Gigabit ports for high-density wired connectivity
  • Class 4 PoE delivers up to 30 W per port for powered devices
  • Four SFP56 ports support 1 GbE, 10 GbE, 25 GbE and 50 GbE uplinks
  • USB-C console, OOBM and USB-A host simplify out-of-band management
  • Bluetooth dongle enables CX Mobile App configuration from a phone

HPE Aruba 6300F 48-Port PoE Switch

The HPE Aruba 6300F is a managed Ethernet switch with 48 ports supporting 10/100/1000BaseT connectivity. It delivers Class 4 PoE power up to 30W per port for attached devices. The unit includes four SFP56 ports operating at 1/10/25/50G speeds for uplinks. Management is provided through USB-C console, OOBM port and Bluetooth for the CX Mobile App.

Ideal for PoE Access Deployments

This switch suits networks needing high-density PoE+ for access points cameras or phones with 25G or 50G uplink flexibility. It fits environments using HCRP or SPP protocols for redundancy. Buyers needing only non-PoE connectivity or requiring higher port counts should consider other models. Organizations without SFP56 uplink requirements may find simpler switches more appropriate.

48 PoE+ Ports with 30W Each

The defining specification is the 48 ports each capable of supplying 30W under IEEE 802.3at. This power budget determines how many high-draw devices can be connected simultaneously. The four SFP56 ports support 1G 10G 25G and 50G transceivers for uplink aggregation. Match the total PoE load to the switch power supply capacity before purchasing.

Highlights

  • 48 Gigabit ports for high-density wired connectivity
  • Class 4 PoE delivers up to 30 W per port for powered devices
  • Four SFP56 ports support 1 GbE, 10 GbE, 25 GbE and 50 GbE uplinks
  • USB-C console, OOBM and USB-A host simplify out-of-band management
  • Bluetooth dongle enables CX Mobile App configuration from a phone

Specifications

BrandHPE
Switch TypeEthernet Switch
ProtocolsHCRP, SPP
Weight1

Questions about this item

How do I mount the 48-port 1GbE Class 4 PoE switch in a rack, and what step do people often miss?

Secure the unit with the supplied rack-mount brackets, then connect the OOBM port before powering on so remote management is available immediately.

Which component of the 6300F will most likely need replacement after several years of 30 W PoE+ loads?

The internal power-supply fans are the first wear item under continuous high PoE output; plan a fan-tray swap during scheduled maintenance.

What throughput limit appears first when all 48 ports and four SFP56 uplinks run at sustained line rate?

The shared backplane bandwidth becomes the bottleneck before any individual 10/100/1000BaseT or 50G SFP56 port saturates.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.