We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
HPE 3.5 inch internal SAS hard drive module

HPE

HPE 765867-001 600 GB 3.5" 15000 rpm SAS 12Gb/s switch module

SKU CH-G09Q-BN9FF

A 600 GB 3.5-inch internal hard drive spinning at 15000 rpm with a 12Gb/s SAS interface

  • 600 GB capacity stores large datasets
  • 15000 rpm spindle speed accelerates data access
  • 12Gb/s SAS interface enables fast transfers
  • 5 inch form factor fits standard bays
  • Internal drive type simplifies server installation

HPE 600 GB 15K SAS drive

This HPE 765867-001 hard drive delivers 600 GB of storage in a 3.5-inch internal form factor. It uses a SAS interface operating at 12Gb/s with a spindle speed of 15000 rpm. The drive is designed for enterprise server and storage array installations requiring high transaction rates.

Sustained 15000 rpm operation

The 15000 rpm spindle speed maintains consistent throughput under continuous heavy workloads rather than only during brief bursts. SAS 12Gb/s signalling supports full-duplex communication to keep queues moving during prolonged demand. This mechanical performance profile suits databases and virtualisation hosts that run at high utilisation for extended periods.

Verify SAS 12Gb/s backplane and bay fit

Confirm your chassis accepts a 3.5-inch internal drive and that the backplane or controller supports SAS 12Gb/s speeds. Check that the system firmware recognises HPE-branded drives and that cabling matches the SAS interface standard. Ensure adequate cooling for a 15000 rpm device in the target enclosure.

Highlights

  • 600 GB capacity stores large datasets
  • 15000 rpm spindle speed accelerates data access
  • 12Gb/s SAS interface enables fast transfers
  • 5 inch form factor fits standard bays
  • Internal drive type simplifies server installation

Specifications

Brand765867-001

Questions about this item

How much heat and noise does the 15000 rpm SAS drive generate when running continuously?

The 15000 rpm spindle speed means higher sustained heat output and audible seek noise compared to slower drives; plan for active airflow in the 3.5" bay.

What host interface and cabling are required to connect the 12Gb/s SAS drive?

A SAS HBA or RAID controller with 12Gb/s ports and a compatible SAS cable are needed; the drive uses a standard SAS connector.

Will the 600 GB 3.5" SAS drive work in an older 6Gb/s SAS backplane?

Yes, the 12Gb/s SAS interface negotiates down to 6Gb/s, so the drive functions on legacy backplanes at the lower speed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.