We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
HPE 3.5 inch internal hard drive silver metal casing

HPE

HPE 575262-001 2 TB 3.5" 7200 rpm SATA/300 internal hard drive

SKU CH-7J32-5TW5N

2 TB internal hard drive with 3.5 inch form factor, 7200 rpm spindle speed and SATA/300 interface

  • Electrical Outlet Plug TypeHard Drive
  • 2 TB capacity stores large data volumes
  • 7200 rpm spindle speed enables fast data access
  • SATA/300 interface provides reliable connectivity
  • 5 inch form factor fits standard drive bays
  • HP Qualified Option ensures tested compatibility

2 TB 3.5" SATA Internal Drive

This HPE 575262-001 hard drive provides 2 TB of storage in a 3.5 inch internal form factor. It operates at 7200 rpm and uses a SATA interface running at the SATA/300 standard. The unit is designed for installation inside compatible servers or workstations.

Check SATA Port and Bay Compatibility

Before ordering, verify that your system has an available 3.5 inch drive bay and a free SATA port that supports the SATA/300 interface standard. Confirm the chassis can supply adequate power and cooling for a 7200 rpm mechanical drive. Ensure the operating system or RAID controller recognises drives of this capacity.

Sustained Throughput at 7200 rpm

Under continuous workloads the 7200 rpm spindle speed delivers steadier sequential throughput than lower-speed drives. The SATA/300 link caps maximum burst transfer, so sustained rates will settle at the interface limit during long reads or writes. Thermal output remains consistent once the drive reaches operating temperature.

Highlights

  • 2 TB capacity stores large data volumes
  • 7200 rpm spindle speed enables fast data access
  • SATA/300 interface provides reliable connectivity
  • 5 inch form factor fits standard drive bays
  • HP Qualified Option ensures tested compatibility

Specifications

BrandHPE
Electrical Outlet Plug TypeHard Drive

Questions about this item

Does the HPE 575262-001 ship with any cables or mounting brackets, or must those be purchased separately?

The drive is supplied as a bare 3.5" internal unit; SATA data and power cables plus any mounting hardware are not included and must be sourced separately.

Is the 2 TB, 7200 rpm SATA/300 version the only capacity and speed offered for this part number?

Yes, part 575262-001 is defined as a single 2 TB model spinning at 7200 rpm with a SATA/300 interface; no other capacities or speeds share this part number.

What real-world throughput can I expect from the SATA/300 interface once the drive is installed in a server?

The SATA/300 interface caps the maximum burst transfer rate at 300 MB/s; sustained read/write speeds will be lower and depend on the 7200 rpm mechanics and system workload.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.