We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green low-profile PCIe card with dual SFP+ ports

HP

HP QLE2662 Dual Port 16Gb SFP+ Fibre HBA laptop replacement part

SKU CH-CTXJ-Q9FNJ MPN QLE2662

Dual-port 16Gb Fibre Channel HBA with PCIe 3.0 x8 interface for HP ProLiant servers

  • Compatible ManufacturerFor HP
  • Compatible ModelsFor HP ProLiant servers and storage systems supporting PCIe
  • ColorGreen
  • Dual-port 16Gb Fibre Channel connectivity for high-performance SANs
  • PCIe 3.0 x8 interface for maximum throughput
  • Backward compatible with 8Gb and 4Gb Fibre Channel networks
  • Low-profile form factor for flexible server integration
  • Optimized for HP ProLiant server environments

Dual-Port 16Gb Fibre Channel Adapter

The HP QLogic QLE2662 is a dual-port 16Gb Fibre Channel host bus adapter built for HP ProLiant servers and storage systems that support PCIe HBAs. It delivers enterprise-grade connectivity for mission-critical storage environments requiring high bandwidth and low latency. This new replacement part suits IT teams managing virtualization, data-intensive workloads, or SAN consolidation projects.

PCIe 3.0 x8 Interface and Bandwidth Headroom

The adapter uses a PCIe 3.0 x8 interface to provide maximum throughput for dual 16Gb SFP+ ports. It comfortably handles high-bandwidth, low-latency traffic in virtualized and cloud deployments. Performance will run out when aggregate Fibre Channel demand exceeds the 16Gb per-port line rate or when the host PCIe 3.0 x8 lane bandwidth becomes saturated by concurrent workloads.

Fibre Channel Speed Limits

The 16Gb Fibre Channel standard sets the practical ceiling for each SFP+ port, and the card is backward compatible with 8Gb and 4Gb networks. Deployments that require speeds beyond 16Gb per port cannot be served by this adapter. Environments locked to older Fibre Channel generations will operate at the lower negotiated speed without additional configuration.

Highlights

  • Dual-port 16Gb Fibre Channel connectivity for high-performance SANs
  • PCIe 3.0 x8 interface for maximum throughput
  • Backward compatible with 8Gb and 4Gb Fibre Channel networks
  • Low-profile form factor for flexible server integration
  • Optimized for HP ProLiant server environments

Specifications

BrandHP
ModelQLE2662
Part Number699765-001
Compatible ManufacturerFor HP
Compatible ModelsFor HP ProLiant servers and storage systems supporting PCIe HBAs
ColorGreen

Questions about this item

Will the QLE2662 work with my existing 8Gb and 4Gb Fibre Channel switches and storage arrays?

Yes, the dual-port 16Gb SFP+ adapter is backward compatible with 8Gb and 4Gb Fibre Channel networks, allowing integration with older SAN infrastructure.

How can I verify the QLE2662 is functioning correctly after installing it in my ProLiant server?

Check the server BIOS or iLO interface to confirm the PCIe 3.0 x8 adapter is detected on both ports, then verify link lights on the SFP+ modules show active 16Gb connections.

Does the QLE2662 include SFP+ transceivers and cables, or must I purchase them separately?

The adapter ships with the low-profile bracket installed; SFP+ transceivers and fibre patch cables are not included and must be sourced separately for each port.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.