We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
HP J9990A switch module with 20 Ethernet ports and 4 SFP+ cages

HP

HP J9990A 20-port 10/100/1000BASE-T PoE+ 4-port 1G/10GbE SFP+ switch module

SKU CH-NYCH-0AAFM

A 20-port Gigabit PoE+ module with four SFP+ uplinks for the 5400R zl2 switch series

  • 20 Gigabit ports connect many devices
  • PoE+ powers phones and cameras over cable
  • Four SFP+ slots add 10 GbE uplinks
  • MACsec v3 encrypts traffic on every link
  • Designed for the 5400R zl2 switch series

20-Port PoE+ Switch Module

The HP J9990A module adds 20 copper ports with 10/100/1000BASE-T connectivity and PoE+ support to a compatible chassis. Four additional SFP+ ports provide 1G or 10GbE uplink flexibility. It is designed for network teams expanding wired access in campus or branch environments.

Upgrade From Non-PoE Linecards

This module replaces linecards that lack PoE+ or SFP+ uplinks, delivering power to phones, cameras and access points over the same copper run. The jump is worth it when existing 10/100/1000BASE-T ports cannot supply PoE+ or when uplink capacity must move beyond 1GbE without changing the chassis.

Fits 5400R zl2 Switch Series

The module slots into an HP 5400R zl2 chassis, consuming one module bay and drawing power from the chassis supply. It frees up separate PoE injectors and standalone uplink switches, consolidating cabling and management in a single rackmount system. No separate power supply or fan tray is required.

Highlights

  • 20 Gigabit ports connect many devices
  • PoE+ powers phones and cameras over cable
  • Four SFP+ slots add 10 GbE uplinks
  • MACsec v3 encrypts traffic on every link
  • Designed for the 5400R zl2 switch series

Specifications

ModelJ9990A

Questions about this item

What switch chassis does the J9990A module install into?

The J9990A module is designed for the HP 5400R zl2 Switch Series chassis and occupies a single module slot.

How do you seat the J9990A module correctly in the 5400R zl2 chassis?

Align the module with the guide rails, slide it in firmly until the ejector lever clicks, then tighten the captive retention screws to secure the electrical connection.

Which components on the J9990A module are field-replaceable if they fail?

The four SFP+ transceiver cages accept standard 1G or 10G SFP+ modules that can be swapped independently of the module itself.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.