We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
HP 36.4Gb 10000RPM Ultra 160 SCSI LVD 3.5" 1.0" low-profile hot-swap drive with tray

HP

HP D9419-63001 36.4Gb 10000 Rpm Ultra 160 SCSI LVD 3.5" 1.0" Low Profile Hot Swap Hard Drive

SKU CH-C7T4-6NC7B

A 36.4 GB Ultra 160 SCSI hard drive with 10,000 RPM speed in a 3.5 inch low-profile hot-swap tray for Netserver systems

  • 4 GB capacity stores critical server data
  • 10,000 RPM spindle speed accelerates I/O throughput
  • Ultra 160 SCSI LVD interface delivers 160 MB/s bandwidth
  • 0-inch low-profile hot-swap tray fits Netserver bays

HP 36.4Gb 10000 Rpm Ultra 160 SCSI Drive

This HP D9419-63001 hard drive provides 36.4Gb of storage on a 3.5 inch form factor with a 1.0 inch low profile. It spins at 10000 Rpm and uses an Ultra 160 SCSI LVD interface. The unit includes a hot swap tray designed for Netserver bays. It suits administrators maintaining legacy SCSI storage arrays.

Thermals noise and power in normal use

The 10000 Rpm spindle and 1.0 inch height produce audible seek noise and measurable heat during sustained operation. Power draw scales with the Ultra 160 SCSI LVD signalling and rotational speed. Builders needing silent or low power drives should consider alternative technologies. Buyers who want larger capacities or modern interfaces cannot use this module.

Highlights

  • 4 GB capacity stores critical server data
  • 10,000 RPM spindle speed accelerates I/O throughput
  • Ultra 160 SCSI LVD interface delivers 160 MB/s bandwidth
  • 0-inch low-profile hot-swap tray fits Netserver bays

Specifications

BrandHP

Questions about this item

How do I install the 3.5-inch Ultra 160 SCSI drive into a Netserver hot-swap bay without damaging the 1.0-inch low-profile tray?

Align the drive tray with the bay rails, push firmly until the SCA-2 connector seats fully, then lock the ejection lever; the tray's 1.0-inch height ensures clearance but misaligned insertion bends the connector pins.

What maintenance will the 10000 RPM 36.4Gb SCSI drive require over its service life?

No scheduled maintenance is needed; monitor SMART attributes for reallocated sectors and rising seek errors, and replace the drive once error counts exceed the vendor thresholds to avoid data loss.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.