HOUGEN
HOUGEN 12722 12,000-Series TiN Annular Cutter 11/16 in. X 2 in
A TiN-coated annular cutter drills 11/16 inch diameter holes up to 2 inches deep in the 12,000-Series
- TiN coating extends cutter life
- 11/16 inch diameter cuts precise holes
- 2 inch depth of cut handles thick material
- 12000-Series design fits Hougen magnetic drills
- New condition delivers full factory performance
12,000-Series TiN Annular Cutter 11/16 in. X 2 in
The HOUGEN 12722 is a TiN-coated annular cutter built for magnetic-base drills. It creates 11/16 in. diameter holes with a 2 in. depth of cut in structural steel and plate. The 12,000-Series design suits maintenance, fabrication and on-site construction work.
Cutting depth and shank fit
The 2 in. depth of cut sets the maximum material thickness you can drill in one pass. The cutter uses the standard 12,000-Series shank, so it only fits arbors and quick-change adapters made for that series. TiN coating reduces friction but does not change the depth limit.
Arbor compatibility and pilot pin
Verify that your magnetic drill accepts the 12,000-Series shank before ordering. A matching pilot pin is required to eject the slug and start the cut accurately; the pin length must suit the 2 in. cutting depth. Confirm coolant delivery reaches the teeth for the material you are drilling.
Highlights
- TiN coating extends cutter life
- 11/16 inch diameter cuts precise holes
- 2 inch depth of cut handles thick material
- 12000-Series design fits Hougen magnetic drills
- New condition delivers full factory performance
Specifications
| Brand | HOUGEN |
|---|
Questions about this item
Should I choose the 11/16 inch or another diameter for my application?
Select the 11/16 inch cutter when the hole diameter must match that exact size; other diameters are separate part numbers.
What does the 12,000-Series designation mean when the cutter is in the machine?
It identifies this cutter as part of Hougen's 12,000-Series line, built with TiN coating for extended life in magnetic drilling.
Which shank interface does the 12722 use and what does it limit?
The cutter fits Hougen 12,000-Series arbors, so the shank style caps compatibility to that arbor system.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
