HOUGEN
HOUGEN 12252 12,000-Series Annular Cutter
Cuts 1-5/8 inch diameter holes to 2 inch depth in steel using 12,000-Series geometry
- Cuts 1-5/8 in. diameter holes cleanly
- 2 in. depth of cut for thick material
- 12,000-Series design fits compatible magnetic drills
- HOUGEN brand trusted by metalworking professionals
- New condition ensures full factory performance
HOUGEN 12252 Annular Cutter Overview
The HOUGEN 12252 is a 12,000-Series annular cutter designed for creating 1-5/8 in. diameter holes with a 2 in. depth of cut. It is built for magnetic drilling machines used in metal fabrication, structural steel work and maintenance tasks. The cutter removes only the hole perimeter, reducing power demand and material waste compared to twist drills. This new accessory arrives ready for professional workshop or job-site use.
Suited For Magnetic Drill Users
This cutter suits operators with a compatible magnetic drill that accepts the 12,000-Series shank and who need the exact 1-5/8 in. diameter for bolt holes or pipe work. It is not for users requiring different diameters, deeper cuts or alternative shank styles such as Weldon or Nitto. Buyers without a magnetic drill or those needing carbide-tipped or coated variants should look at other product lines.
Verify Shank Fit And Machine Capacity
Before ordering, confirm that your magnetic drill’s arbor accepts the 12,000-Series shank configuration used on this model. Check that the machine delivers sufficient stroke length for the 2 in. cutting depth and that its motor torque matches the cutter diameter. Ensure the workpiece material and thickness are appropriate for high-speed steel annular cutting and that coolant delivery is available.
Highlights
- Cuts 1-5/8 in. diameter holes cleanly
- 2 in. depth of cut for thick material
- 12,000-Series design fits compatible magnetic drills
- HOUGEN brand trusted by metalworking professionals
- New condition ensures full factory performance
Specifications
| Brand | HOUGEN |
|---|
Questions about this item
What magnetic drill press or arbor is required to run the HOUGEN 12252 12,000-Series Annular Cutter?
The 12,000-Series cutter fits a standard 3/4 in. Weldon shank, so it mounts directly on any magnetic drill press or drill arbor that accepts that shank size.
Will the 12,000-Series cutter work on the same steel plate thicknesses I currently cut with older HOUGEN cutters?
This cutter has a 2 in. depth of cut, so it handles plate up to that thickness; if your existing cutters are also rated for 2 in. depth, the working range is identical.
How can I confirm the 12252 is cutting correctly once installed?
A properly fed cutter produces a continuous, tightly curled chip and leaves a clean, burr-free hole at the full 2 in. depth without excessive vibration.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
