HOUGEN
HOUGEN 12125S 25/32 X 1 in. 12000-Series Annular Cutter Stack Cut pneumatic accessory
25/32 x 1 in. 12000-Series annular cutter for stack cutting applications
- 25/32 in. diameter suits precise hole sizes
- 1 in. cutting depth handles thick plate
- 12000-Series design built for stack cutting
- Annular cutter geometry removes less material
- HOUGEN brand trusted for industrial accessories
Product identity
The Hougen 12125S is a 12000-series annular cutter built for stack cutting. It serves metalworkers who need to drill through multiple layers in one pass. The cutter measures 25/32 by 1 in. and arrives new from the manufacturer.
Stack cutting limits
Stack cutting places higher load on the tool and the air supply than single-plate work. The cutter geometry is optimised for the 12000 series range, so feed pressure must stay steady to avoid binding. Cutting depth is fixed at 1 in., so total stack thickness cannot exceed that value.
Compatibility checks
Verify that your magnetic drill or press accepts 12000-series shank dimensions before ordering. Confirm the pneumatic system can deliver consistent pressure for the full depth of cut. Ensure the workpiece stack does not surpass the 1 in. cutting capacity of this accessory.
Highlights
- 25/32 in. diameter suits precise hole sizes
- 1 in. cutting depth handles thick plate
- 12000-Series design built for stack cutting
- Annular cutter geometry removes less material
- HOUGEN brand trusted for industrial accessories
Specifications
| Brand | HOUGEN |
|---|
Questions about this item
Should I choose the 25/32 inch or 1 inch cutting depth for this annular cutter?
The cutter has a 1 inch depth of cut; the 25/32 figure is the hole diameter it produces.
What does the 12000-Series designation tell me about performance in a magnetic drill?
It identifies the cutter as part of the 12000-Series Stack Cut line, designed for multi-layer plate drilling with a 1 inch depth.
What shank interface does this cutter use and what machines accept it?
It uses the standard 3/4 inch Weldon shank found on most 12000-Series cutters, fitting magnetic drills with that chuck.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
