Hosa Technology
Hosa Technology STP-204 Insert Cable 1/4in TRS to Dual 1/4in TS 4m
A 4-metre insert cable splitting a single 1/4-inch TRS jack into dual 1/4-inch TS plugs for studio or stage routing
- 4-metre length gives flexible routing on stage or in the studio
- 1/4-inch TRS to dual 1/4-inch TS splits insert points for outboard gear
- Quality connectors maintain clean signal transfer for recording and live use
- Hosa Technology has supplied pro-audio cables since 1984
- Cost-effective solution integrates equipment into most studio or stage environments
Insert cable for audio routing
The Hosa Technology STP-204 insert cable splits a single 1/4 inch TRS connection into two 1/4 inch TS plugs. It is built for stage or studio use where an insert point must be accessed for external processing or monitoring. Musicians and engineers use it to patch compressors, equalisers or other outboard gear into a mixer channel.
Check your jack layout and length needs
Verify that the source device presents a stereo TRS jack wired for insert send and return before ordering. The cable runs four metres, so confirm the distance between your mixer and the external processor fits that reach. Ensure both destination inputs accept mono TS plugs rather than TRS or XLR connectors.
Passive construction means no power or heat
This cable draws no power and generates no heat or noise during normal use. Signal integrity depends on the quality of the connectors and the shielding provided by Hosa Technology. Normal handling and routing will not affect thermal performance or introduce audible interference.
Highlights
- 4-metre length gives flexible routing on stage or in the studio
- 1/4-inch TRS to dual 1/4-inch TS splits insert points for outboard gear
- Quality connectors maintain clean signal transfer for recording and live use
- Hosa Technology has supplied pro-audio cables since 1984
- Cost-effective solution integrates equipment into most studio or stage environments
Specifications
No published specifications for this item yet.
Questions about this item
What connectors does the STP-204 insert cable provide and are any adapters required?
The cable has a 1/4 inch TRS plug on one end and two 1/4 inch TS plugs on the other, so it connects directly to insert points without extra adapters.
Which length version of this insert cable should I choose for my setup?
This model is the 4 metre version; choose it when your mixer or patch bay sits up to four metres from the processor you are inserting.
How does the 4 metre length affect signal quality in a studio insert loop?
At four metres the cable keeps resistance and capacitance low enough for transparent line-level insert returns in typical studio or stage runs.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor Made 12" x 18" Jolly Roger Novelty Flag 1818 marine electronic
- Accessories



