Hosa Technology
Hosa HXS-030 Pro Balanced Interconnect REAN XLR3F to 1/4" TRS 30 Feet 2 in 1 accessory
A 30-foot balanced interconnect with REAN XLR3F to 1/4" TRS connectors for noise-free studio and live audio
- Professional balanced audio with REAN XLR3F to 1/4" TRS connectors
- Noise reduction minimizes interference and hum for pristine sound quality
- Durable construction built for studio and live sound demands
- Versatile connectivity links microphones to balanced TRS inputs
- 30-foot length provides extended reach for stage and studio setups
Balanced XLR-to-TRS Interconnect
This cable connects equipment with XLR outputs to devices with balanced 1/4-inch TRS inputs. It suits studio and live-sound users who need a single 30-foot run for microphones or line-level sources. The REAN connectors provide a secure, professional lock.
Sustained Signal Integrity
Balanced wiring rejects common-mode noise over the full cable length, keeping hum and interference low during extended sessions. The construction is rated for repeated stage and touring use without signal degradation. Shielding remains effective across the entire run.
Analogue Balanced Interface Limits
The 1/4-inch TRS connection carries an analogue balanced signal only; it does not pass digital audio or phantom power. Cable capacitance and driver output impedance set the practical high-frequency roll-off. Length is fixed at 30 feet and cannot be extended without additional hardware.
Highlights
- Professional balanced audio with REAN XLR3F to 1/4" TRS connectors
- Noise reduction minimizes interference and hum for pristine sound quality
- Durable construction built for studio and live sound demands
- Versatile connectivity links microphones to balanced TRS inputs
- 30-foot length provides extended reach for stage and studio setups
Specifications
No published specifications for this item yet.
Questions about this item
Does the 30-foot length of the Hosa HXS-030 add noticeable noise or signal loss when running all day?
The cable uses balanced REAN XLR3F to 1/4" TRS construction designed to minimise interference and hum over its full 30-foot run for clean audio.
What equipment must I already have to use the Hosa HXS-030's XLR3F and 1/4" TRS connectors?
You need a source device with an XLR output and a destination device with a balanced 1/4" TRS input such as a mixer or audio interface.
Will the Hosa HXS-030 work reliably with older mixing consoles or microphone preamps I already own?
Yes, its standard XLR3F and 1/4" TRS connectors are compatible with legacy professional audio gear that uses balanced phone inputs.
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
