Honeywell
Honeywell YTH5320R1000/U Wireless FocusPRO Kit Thermostat
Wireless non-programmable thermostat kit controls up to three heat and two cool stages for gas, oil, electric or heat-pump systems without new wiring
- TypeNon-Programmable Thermostats
- Wireless kit relocates or upgrades without new wires
- Non-programmable thermostat controls up to 3 heat and 2 cool stages
- Battery-powered thermostat simplifies installation and wiring
- Works with gas, oil, electric, heat pump and more systems
- Includes return-air sensor, equipment interface module and thermostat
Kit contents and purpose
The Honeywell YTH5320R1000/U Wireless FocusPRO Kit provides everything needed to relocate or upgrade a thermostat without running new wires. It includes a wireless non-programmable thermostat, an equipment interface module, and a return air sensor. The system supports gas, oil, electric, heat pump, forced warm air, hot water, steam, or gravity applications.
Who this suits and who it does not
This kit suits homeowners who want simple temperature control without schedules and need wireless flexibility for difficult wiring runs. It handles up to three heat and two cool stages for heat pumps or two heat and two cool stages for conventional systems. Buyers who want programmable scheduling or smart home integration should look at other models.
Installation ease and common issues
The thermostat runs on batteries while the equipment interface module requires 18 to 30 Vac at 50 or 60 Hz. Terminal designations include C, R, Rc, Rh, W-O/B, W2-Aux/E, Y, Y2, G, L, and RAS for straightforward wiring. Common issues include incorrect changeover selection between auto and manual modes or exceeding the 1.0 amp running current limits for heating and cooling circuits.
Highlights
- Wireless kit relocates or upgrades without new wires
- Non-programmable thermostat controls up to 3 heat and 2 cool stages
- Battery-powered thermostat simplifies installation and wiring
- Works with gas, oil, electric, heat pump and more systems
- Includes return-air sensor, equipment interface module and thermostat
Specifications
| Type | Non-Programmable Thermostats |
|---|
Questions about this item
What existing HVAC equipment must I have for the THM5320R1000 Equipment Interface Module to connect?
The module works with gas, oil, electric, heat pump, forced warm air, hot water, steam or gravity systems that provide 18 to 30 Vac at 50 or 60 Hz.
Will the C7735A1000 Return Air Sensor replace the wired sensor on my current zone panel?
The wireless sensor communicates with the Equipment Interface Module, so it can serve the same sensing role without running new wires to the panel.
How do I confirm the TH5320R1002 thermostat is communicating with the Equipment Interface Module after installation?
Set the system switch to HEAT or COOL and verify the display shows the corresponding mode; the module will then activate the appropriate relay for the connected stages.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
