We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver steel floor mount sleeve with PVC liner, bolt-on flush base for confined space hoist

Honeywell

Honeywell Miller DH-7ZP Hoist Floor Mount Sleeve 450 lb capacity

SKU CH-QHCY-HKXZP

A steel floor-mount sleeve for confined-space hoists with a 450 lb weight capacity and zinc-plated finish

  • ColorSilver
  • MaterialHAWA
  • Supports 450 lb worker capacity
  • Zinc-plated steel resists corrosion
  • Bolt-on flush mount installs on concrete or steel
  • Includes PVC liner to protect equipment
  • Compatible with Miller DH-19, DH-3 and MR50GC-Z7/50FT systems

Confined Space Hoist Sleeve

The Honeywell Miller DH-7ZP is a floor-mounted sleeve designed for confined space entry and retrieval systems. It provides a fixed, flush-mount anchor point on concrete or steel surfaces for compatible hoist arms. The unit includes a PVC liner to protect components during use. It is built for industrial maintenance and rescue teams needing a permanent base installation.

Bolt-On Floor Mount Limits

This sleeve installs with a bolt-on mounting style and weighs enough to require secure anchoring to structural concrete or steel. The base measures 10 inches by 10 inches with a height of 9 1/4 inches, defining the footprint needed on the floor. It accepts only the one-piece arm configuration listed in the compatibility data. Buyers needing a portable or removable anchor point should select a different mounting style.

450 lb Working Capacity

The decisive specification is the 450 lb weight capacity, which sets the maximum combined load for personnel and equipment during entry or rescue operations. The base material is steel with a zinc-plated finish and a tensile strength of 5,000 lb, but the system rating governs safe use. Exceeding this limit risks structural failure and injury. Verify that your application stays within this figure before purchase.

Highlights

  • Supports 450 lb worker capacity
  • Zinc-plated steel resists corrosion
  • Bolt-on flush mount installs on concrete or steel
  • Includes PVC liner to protect equipment
  • Compatible with Miller DH-19, DH-3 and MR50GC-Z7/50FT systems

Specifications

ColorSilver
BrandHONEYWELL MILLER
MaterialHAWA

Questions about this item

Should I choose the DH-7ZP sleeve or a different model for my 450 lb capacity requirement?

The DH-7ZP sleeve is rated for a 450 lb weight capacity, matching your requirement exactly. It is designed as a confined space component base for floor mounting on concrete or steel.

What does the 5,000 lb tensile strength mean when the sleeve is installed in a real machine?

The 5,000 lb tensile strength indicates the maximum pulling force the steel base can withstand before failure, providing a significant safety margin above the 450 lb working capacity during confined space operations.

How does the bolt-on flush mount interface cap what I can attach to this sleeve?

The bolt-on flush mount design fixes the sleeve permanently to the floor, limiting use to compatible one-piece arm components like the DH-19-MILLER, DH-3, or MR50GC-Z7/50FT hoists listed for this base.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.