We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver and orange metal shuttle device with attachment points

Honeywell

Honeywell Miller 1005709 Shuttle Silver/Orange 7 In traffic safety equipment

SKU CH-E5BE-N4872

A horizontal lifeline shuttle rated for 310 lb and up to four workers on 120 ft steel cable, ANSI A10.32-2004 and OSHA compliant

  • ColorSilver/Orange
  • ANSI A10.32-2004 and OSHA compliant for regulated job sites
  • 310 lb weight capacity supports up to four workers simultaneously
  • 120 ft steel lifeline enables extended horizontal reach
  • Steel hardware and tie-off mounting ensure secure beam attachment
  • Silver/orange shuttle component integrates with harness and lanyard systems

Honeywell Miller 1005709 Shuttle

The Honeywell Miller 1005709 Shuttle is a horizontal lifeline component designed for temporary fall protection installations. It serves workers who need a mobile attachment point on beam structures with flange widths between 4 inches and 2 1/4 inches. The device supports up to four workers per system with a 310 lb weight capacity per person. It integrates with compatible harness and lanyard setups for active fall arrest.

Replaces fixed anchor points

This shuttle replaces the need for permanent anchor installations when temporary horizontal lifeline systems are required on site. The upgrade is worth it when crews move between beam locations frequently and need a reusable, standards-compliant tie-off that meets ANSI A10.32-2004 and OSHA requirements. It eliminates the labor of welding or bolting fixed anchors for short-duration projects. The 5,000 tensile strength rating ensures reliable performance during fall events.

Installation and common issues

The shuttle mounts by tying off directly to compatible beam flanges without tools, allowing rapid deployment and relocation. Installation errors typically occur when the flange width falls outside the 4 inch minimum or 2 1/4 inch maximum range, preventing secure engagement. Users must verify the beam flange dimensions before each use. Improper orientation or failure to lock the shuttle onto the lifeline cable can compromise the entire fall protection system.

Highlights

  • ANSI A10.32-2004 and OSHA compliant for regulated job sites
  • 310 lb weight capacity supports up to four workers simultaneously
  • 120 ft steel lifeline enables extended horizontal reach
  • Steel hardware and tie-off mounting ensure secure beam attachment
  • Silver/orange shuttle component integrates with harness and lanyard systems

Specifications

ColorSilver/Orange
BrandHONEYWELL MILLER

Questions about this item

What beam flange width range does the Honeywell Miller 1005709 Shuttle fit?

The shuttle mounts on beam flanges from 4 inches minimum up to 2 1/4 inches maximum width using a tie-off mounting method.

How is the Honeywell Miller 1005709 Shuttle installed on a horizontal lifeline system?

Attach the shuttle to the steel lifeline by tying it off at a compatible anchor point; the step often missed is verifying the beam flange falls within the 4 in to 2 1/4 in range before securing.

When should the Honeywell Miller 1005709 Shuttle be replaced or inspected?

Inspect the steel hardware and shuttle body before each use; replace the unit if any component shows wear, deformation or damage that could affect the 310 lb weight capacity or 5,000 tensile strength rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.