Honeywell
Honeywell HDXANPASW 470TVL 18x optical zoom indoor pendant smoke PTZ dome surveillance security system
An indoor PTZ dome camera with 18× optical zoom, 12× digital zoom and 470 TVL resolution for detailed surveillance
- Sharp detail from >470 TVL NTSC resolution
- 18x optical zoom covers 4.1 mm to 73.8 mm
- 12x digital zoom extends reach to 216x total
- Pan-tilt-zoom flexibility with 48° to 2.8° viewing angles
- 24 VAC Class 2 power with 29 W idle consumption
Indoor PTZ dome with 18x optical zoom
The Honeywell HDXANPASW is a 1/4-inch Ex-view HAD CCD camera delivering over 470 TVL resolution for indoor surveillance. Its 18x zoom lens ranges from 4.1mm to 73.8mm with an aperture of F1.4 to F3.0. The unit mounts as a pendant in a smoke dome housing and supports 216x total zoom with digital enhancement.
Suits installations needing a single 24 VAC PTZ
This camera suits installers who need a 24 VAC powered dome with 12x digital zoom and horizontal viewing angles from 48 to 2.8 degrees. It is not for buyers who need a camera operating on 12 VDC or PoE power. It is also not for setups requiring a multi-camera recording system or a network video recorder, as those components are not included.
24 VAC input voltage with 21 to 27 VAC tolerance
The camera requires a 24 VAC Class 2 LPS supply at 50 or 60 Hz and accepts an input range of 21 to 27 VAC. Peak power draw reaches 41 watts while idle consumption is 29 watts. A power source outside this voltage window will prevent the unit from operating correctly.
Highlights
- Sharp detail from >470 TVL NTSC resolution
- 18x optical zoom covers 4.1 mm to 73.8 mm
- 12x digital zoom extends reach to 216x total
- Pan-tilt-zoom flexibility with 48° to 2.8° viewing angles
- 24 VAC Class 2 power with 29 W idle consumption
Specifications
No published specifications for this item yet.
Questions about this item
How is the Honeywell HDXANPASW pendant dome installed, and what step is often missed?
Mount the pendant bracket to a ceiling junction box, connect 24 VAC Class 2 LPS wiring within the 21 to 27 VAC tolerance, then secure the dome; the step often missed is verifying the supply stays inside that voltage window under load.
What maintenance or replacement will the Honeywell HDXANPASW need later?
Plan to clean the smoke dome and lens periodically to preserve the 48-degree wide and 2.8-degree tele views, and budget for the 1/4-inch Ex-view HAD CCD sensor or 18x zoom lens assembly if image quality degrades after extended use.
What limit appears first on the Honeywell HDXANPASW during sustained operation?
The 41 W peak power draw and resulting heat buildup inside the sealed pendant housing typically become the first constraint during continuous pan, tilt, and zoom cycles.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
vtech VC7002 open/closed sensor surveillance security system
- Home Improvement



