Homax
Homax 34040 Hybrid Caulking Strip 1 5/8 in x 11 ft White
Waterproof hybrid strip seals kitchen and bath joints on ceramic, drywall and plastic with a 12-hour cure
- Waterproof seal protects kitchens and baths
- Crack-proof formula maintains joints through movement
- Mold and mildew resistance keeps surfaces clean
- 30-minute working time allows precise placement
- Full cure in 12 hours for lasting bond
What the strip is and who it is for
The Homax 34040 is a hybrid caulking strip supplied in a box, coloured white and measuring 11 ft long by 1 5/8 in wide. It is intended for indoor kitchen and bath applications on ceramic, drywall and plastic surfaces. The product is not suited for buyers who need a liquid sealant they can tool into irregular gaps or for projects that require an outdoor-rated formulation.
Behaviour under sustained load
Once applied the strip delivers a waterproof, crack-proof seal that resists mould and mildew. It provides a working time of 30 min before the material sets and reaches full cure after 12 hr. The seal remains stable between 40 Degrees F and 100 Degrees F, making it reliable for normal indoor temperature swings.
Thermals noise and power draw in normal use
The strip is a passive sealing product so it generates no heat, produces no noise and draws no power during its service life. Installation requires only hand pressure within the stated temperature window. No electrical supply or ventilation system is involved.
Highlights
- Waterproof seal protects kitchens and baths
- Crack-proof formula maintains joints through movement
- Mold and mildew resistance keeps surfaces clean
- 30-minute working time allows precise placement
- Full cure in 12 hours for lasting bond
Specifications
| Brand | HOMAX |
|---|
Questions about this item
Does the Homax 34040 Hybrid Caulking Strip generate any heat or noise during its 12-hour cure time?
The strip cures passively at room temperature; it produces no heat, noise or fumes while reaching full strength in 12 hours.
What tools or surface preparation must I already have to install the 1 5/8-inch by 11-foot strip?
You need a clean, dry surface — ceramic, drywall or plastic — between 40 °F and 100 °F, plus a utility knife to trim the 11-foot roll and a roller or finger to press the adhesive into full contact.
Can I apply the Homax 34040 strip over existing silicone or latex caulk that I plan to keep?
No — the hybrid adhesive requires direct contact with bare ceramic, drywall or plastic; old caulk must be removed so the 1 5/8-inch strip bonds and stays waterproof and crack-proof.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
