Hollaender
Hollaender 70-7 External Coupling Aluminum 1.25 in storage shed
- 0.38
$10.99
0.00013168BTC
In stock
Hollaender
Hollaender 17E-8 Adjustable Tee 1.5 in Pipe Fitting
Adjustable tee connects 1.5 in pipes at variable angles using corrosion-resistant aluminum
- Adjustable tee angles for flexible structural layouts
- Corrosion-resistant aluminum withstands outdoor exposure
- Fits 1.5 in pipe with 1 7/8 in outer diameter
- Meets ASTM B179 535 material standard
- 5 1/8 in overall length suits compact assemblies
Adjustable Tee for 1.5 in Pipe
The Hollaender 17E-8 is a structural pipe fitting designed to join 1.5 inch pipe at adjustable angles. Made from corrosion-resistant aluminum with a mill finish, it suits builders erecting handrails, guardrails or modular frames. The tee accepts pipe with an actual outer diameter of 1 7/8 inches and provides a 2 inch inside diameter.
ASTM B179 535 Aluminum Alloy
The fitting conforms to ASTM B179 535, confirming the aluminum alloy and temper used for structural integrity. This specification is the single detail that tells a specifier whether the material meets project requirements for strength and corrosion resistance. No other grade or standard is referenced for this part.
Connects 1.5 Inch Structural Pipe
The tee slips over 1.5 inch nominal pipe with a 1 7/8 inch actual outside diameter, creating a rigid, adjustable junction. Its 5 1/8 inch overall length keeps the joint compact while allowing angular alignment on site. It requires matching Hollaender pipe and set-screw fasteners to complete the assembly.
Highlights
- Adjustable tee angles for flexible structural layouts
- Corrosion-resistant aluminum withstands outdoor exposure
- Fits 1.5 in pipe with 1 7/8 in outer diameter
- Meets ASTM B179 535 material standard
- 5 1/8 in overall length suits compact assemblies
Specifications
| Brand | HOLLAENDER |
|---|
Questions about this item
What does the 1.5 in pipe size mean for actual pipe fit?
The 1.5 in nominal size matches an actual pipe outer diameter of 1 7/8 in, so the fitting accepts standard 1.5 in pipe with a 2 in inside diameter.
How does the ASTM B179 535 standard affect corrosion resistance in outdoor use?
ASTM B179 535 specifies the aluminum alloy and temper, giving the gray mill-finish fitting its corrosion-resistant rating for exposed structural frames.
What clearance does the 5 1/8 in overall length need inside a shed frame?
The adjustable tee measures 5 1/8 in end-to-end, so allow at least that much straight run between connected members for the fitting to sit flush.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
