We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray steel wireway straight section flat cover 6x6x24 inches

HOFFMAN

HOFFMAN F66T124GVP Lay-In Flat-Cover Wireway 6x6x24

SKU CH-ESFP-ME1TD

Straight-section Type 1 wireway with flat cover measuring 6.00 by 6.00 by 24.00 inches in galvanised steel with gray finish

  • Lay-in design speeds cable installation
  • Flat cover protects wires inside
  • Galvanised steel resists corrosion
  • Type 1 rating suits indoor use
  • Straight 24.00 in section extends runs

6×6×24 in Wireway

This HOFFMAN F66T124GVP is a Type 1 lay-in wireway with a flat cover, measuring 6.00 in wide by 6.00 in high by 24.00 in long. It is built from galvanised steel with a grey finish and carries Bulletin F40FC paint. Electrical installers use it to protect and route cables in dry indoor locations.

Indoor conduit runs only

The wireway suits commercial and light-industrial projects that need a straight, paintable raceway for surface mounting. It is not rated for wet, corrosive or hazardous environments, so outdoor or wash-down installations should look elsewhere. Buyers who need fittings, elbows or a hinged cover must source those separately.

24.00 in straight length

The single dimension that decides fit is the 24.00 in length of this straight section. Measure the exact run between junction points before ordering, because the section cannot be shortened on site without losing its listing.

Highlights

  • Lay-in design speeds cable installation
  • Flat cover protects wires inside
  • Galvanised steel resists corrosion
  • Type 1 rating suits indoor use
  • Straight 24.00 in section extends runs

Specifications

BrandHOFFMAN

Questions about this item

How do I install the 6.00 x 6.00 x 24.00 wireway section, and what step is commonly missed?

Mount the straight section flat against the surface using the pre-drilled holes, then snap the flat cover on; the step often missed is tightening all cover screws evenly to maintain the Type 1 seal.

What maintenance will the galvanized steel wireway need over time?

Inspect the gray painted finish periodically for scratches or corrosion; touch up any damaged areas with compatible paint to preserve the galvanized protection.

What limit appears first when the wireway runs continuously in a warm environment?

The 24.00-inch straight section expands with heat, so the first limit is thermal movement at the joints — allow expansion gaps per electrical code to prevent cover buckling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.