We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

HOFFMAN

HOFFMAN F66GCPNKGV Wireway Closure Plate 6x6 in Steel

SKU CH-SVCZ-6ESSA

Steel closure plate seals 6x6 in wireway sections, galvanised finish, NEMA 1 rated for indoor use

  • TypeCable Management & Conduit
  • NEMA Type 1 rating suits indoor wireway installations
  • Galvanised steel resists corrosion in dry environments
  • 16-gauge steel provides rigid closure for 6×6 wireways
  • UL 870 and CSA 22.2 No. 26 certify electrical safety compliance
  • IP30 rating protects against solid object ingress

Wireway Closure Plate 6x6

This galvanised steel closure plate fits Hoffman F66 series wireways with a 6 in by 6 in cross-section. It carries a NEMA Type 1 rating and meets UL 870, CSA C22.2 No. 26 and IEC 60529 IP30 standards for indoor protection. The 16 ga construction provides a solid barrier for cable management systems.

Indoor cable management installers

The plate suits electricians and panel builders closing a 6x6 wireway run in dry, indoor locations where a NEMA 1 enclosure is specified. It is not for outdoor or wash-down environments that demand a higher ingress rating, nor for wireway sizes other than 6 in by 6 in.

16 ga galvanised steel construction

The 16 gauge steel with galvanised finish delivers the mechanical strength and corrosion resistance required for NEMA 1 compliance. This single specification determines whether the plate will withstand the handling and environmental conditions of the intended indoor installation.

Highlights

  • NEMA Type 1 rating suits indoor wireway installations
  • Galvanised steel resists corrosion in dry environments
  • 16-gauge steel provides rigid closure for 6×6 wireways
  • UL 870 and CSA 22.2 No. 26 certify electrical safety compliance
  • IP30 rating protects against solid object ingress

Specifications

BrandNVENT HOFFMAN
TypeCable Management & Conduit

Questions about this item

What wireway size does the 6 in x 6 in closure plate fit?

The plate is made for Hoffman F66 series wireways with a 6 in by 6 in cross-section.

How is the galvanized steel plate secured to the wireway?

It bolts to the open end of the F66 wireway; the common mistake is leaving the mounting screws loose so the NEMA 1 seal is not maintained.

Will the galvanized finish need any upkeep to keep its NEMA 1 rating?

The galvanized coating is maintenance-free under normal indoor conditions; inspect only if the steel is scratched or the enclosure is damaged.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.