HOFFMAN
HOFFMAN AFLTR6 Filter for 6 in Fans Pack of 5
Foam filter pack for 6-inch fans, five pieces for enclosure airflow protection
- TypeEnclosures
- Foam filter traps dust for 6 in fan intakes
- Pack of five supplies multiple replacements or spares
- Compatible with standard six inch enclosure fans
- New condition ensures full filtration performance from first use
- Foam material allows airflow while blocking particulates
Hoffman 6-Inch Fan Filter Pack
The Hoffman AFLTR6 is a pack of five foam filters sized for six-inch cooling fans. They fit enclosures that use standard six-inch fan cut-outs and are intended for installers who need to keep dust and debris out of electrical cabinets. Buyers who require filters for other fan diameters or metal-mesh construction will need a different product.
Foam Media Thermal Impact
The open-cell foam material allows air to pass while trapping particulates, so internal temperatures remain stable under normal airflow. Because the media is lightweight, it adds negligible static pressure and does not increase fan noise in typical enclosure ventilation. Users seeking higher filtration efficiency for fine dust should consider alternative media types.
Pack of Five Replacement Filters
Each pack supplies five identical foam inserts, providing a ready stock for scheduled maintenance swaps. No mounting hardware, frames or adhesive are included, so the filters rely on the existing fan grill or housing for retention. Installers who need framed filters or integrated gaskets must source them separately.
Highlights
- Foam filter traps dust for 6 in fan intakes
- Pack of five supplies multiple replacements or spares
- Compatible with standard six inch enclosure fans
- New condition ensures full filtration performance from first use
- Foam material allows airflow while blocking particulates
Specifications
| Brand | HOFFMAN |
|---|---|
| Type | Enclosures |
Questions about this item
How do I fit the foam filter onto the 6-inch fan housing?
Place the foam filter over the fan intake so the open face covers the full 6-inch diameter, then secure it with the fan's existing mounting screws or clips; the step often missed is seating the foam evenly all round to prevent unfiltered air bypass.
When will the foam filter material need replacing?
Replace the foam elements when airflow drops noticeably or the material shows clogging, tearing or permanent compression — typically after several months in dusty environments, sooner in heavy-contamination areas.
What restriction appears first when the filter loads up during continuous running?
The increasing pressure drop across the foam reduces the fan's delivered airflow, so the cooling capacity falls before the foam itself fails structurally.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Thomas & Betts TY523M Cable Tie 18lb 4in Natural Nylon Stainless Steel Locking Clip Pack 100
CALBRITE S60700FDCC Weatherproof Electrical Box 5.90" x 2.83" 25 cu in
- Electrical Boxes &…
HOFFMAN A12P10G Interior Panel Steel 10.75in H 8.88in W 14 Gauge
- Electrical Boxes &…



