HOFFMAN
HOFFMAN AASHLF1218 Folding Shelf White 12x18in electrical box
White steel folding shelf mounts inside NEMA 4 and 12 enclosures to hold laptops or monitoring gear
- TypeTraffic & Parking Lot
- Steel construction resists wear in demanding environments
- White finish suits clean indoor installations
- Folds flat to save space when idle
- 0 in by 18.0 in surface holds laptops and monitors
- Fits NEMA 4 and 12 enclosures for protected mounting
HOFFMAN AASHLF1218 Folding Shelf
This folding shelf mounts inside NEMA 4 and 12 enclosures to provide a stable work surface. It is built from steel with a white finish and measures 12.0 inches high by 18.0 inches long. The design supports laptop computers and monitoring equipment during service visits. Technicians who need a temporary platform inside a locked cabinet will find it useful.
Replaces makeshift boards or loose trays
When an enclosure has no built-in shelf, this unit adds a dedicated surface that folds away when the door closes. The upgrade is worth it if you regularly place a laptop or test gear inside the cabinet and need a flat, secure area. It removes the risk of equipment sliding off improvised supports. Installers who only need occasional access may not require a permanent folding shelf.
12 by 18 inch steel platform
The 12.0 by 18.0 inch deck holds a typical laptop and small instruments with room to spare. Steel construction handles the weight of portable test gear without flexing. It runs out of space when larger monitors or multiple devices must sit side by side. The shelf folds flat against the enclosure wall to preserve interior volume when not in use.
Highlights
- Steel construction resists wear in demanding environments
- White finish suits clean indoor installations
- Folds flat to save space when idle
- 0 in by 18.0 in surface holds laptops and monitors
- Fits NEMA 4 and 12 enclosures for protected mounting
Specifications
| Brand | HOFFMAN |
|---|---|
| Type | Traffic & Parking Lot |
Questions about this item
Will the 12 in by 18 in shelf fit inside my NEMA 4 or 12 enclosure?
The shelf is designed for NEMA 4 and 12 enclosures; verify your enclosure interior is at least 12.0 in high by 18.0 in wide to accommodate the folded shelf.
What hardware is required to mount the folding shelf to the enclosure wall?
The shelf mounts to the enclosure interior using the enclosure's existing accessory holes; use the screws supplied with the enclosure or matching thread hardware.
Does the white finish on the steel shelf need any protective coating over time?
The factory white finish on the steel is intended for indoor NEMA 4/12 use; inspect periodically for scratches and touch up with matching paint if corrosion appears.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Thomas & Betts TY523M Cable Tie 18lb 4in Natural Nylon Stainless Steel Locking Clip Pack 100
CALBRITE S60700FDCC Weatherproof Electrical Box 5.90" x 2.83" 25 cu in
- Electrical Boxes &…
HOFFMAN A12P10G Interior Panel Steel 10.75in H 8.88in W 14 Gauge
- Electrical Boxes &…



