We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray powder-coated carbon steel electrical enclosure, 8 inches high, 4 inches deep, hinged solid cover with screw-down clamps

HOFFMAN

HOFFMAN A808CH Electrical Enclosure 8 in H 4 in D

SKU CH-Z422-CJTM7

Wall-mount carbon-steel enclosure rated NEMA 12, 13 and IP65 with hinged solid cover, clamps and welded panel nuts

  • TypeElectrical Enclosures, Wireways & Covers
  • NEMA 12 and 13 rating protects against dust and dripping water
  • IP65 rating ensures reliable sealing in wet environments
  • Carbon-steel body with powder-coated finish resists corrosion
  • Hinged cover with screw-down clamps allows quick, secure access
  • Weld nuts simplify panel and terminal mounting inside the enclosure

Enclosure for NEMA 12 and 13 environments

This carbon-steel enclosure carries NEMA 12 and 13 ratings plus IP65 protection for indoor industrial use. A hinged solid cover secures with screw-down clamps and a neoprene gasket to seal out dust, oil and non-corrosive coolant. Weld nuts accept an interior panel or terminal blocks. The powder-coated grey finish resists corrosion in harsh plant conditions.

Thermal and power characteristics in normal use

The sealed metal body relies on natural convection through its walls to dissipate heat from mounted components. No fan or active cooling is integrated, so internal temperature rise depends on the installed equipment load and ambient conditions. The 14/16 gauge steel construction provides mechanical rigidity without adding forced-air noise. Power draw is determined entirely by the devices housed inside the enclosure.

Integration into a control panel build

The enclosure measures eight inches high and four inches deep, with wall-mount provisions built into the back. Series A51CH compatibility allows the use of matching accessories such as the 32FR96 interior panel. Clamp fasteners enable quick access for wiring changes while maintaining the environmental seal. No cut-outs or knockouts are pre-formed, so cable entry points must be drilled to suit the installation.

Highlights

  • NEMA 12 and 13 rating protects against dust and dripping water
  • IP65 rating ensures reliable sealing in wet environments
  • Carbon-steel body with powder-coated finish resists corrosion
  • Hinged cover with screw-down clamps allows quick, secure access
  • Weld nuts simplify panel and terminal mounting inside the enclosure

Specifications

BrandNVENT HOFFMAN
TypeElectrical Enclosures, Wireways & Covers

Questions about this item

How do I mount the enclosure using the weld nuts?

Use the weld nuts to secure an interior panel or terminals, then fasten the enclosure to the wall through the mounting holes on the back.

What maintenance does the neoprene gasket need?

Inspect the neoprene gasket periodically for cracks or compression set and replace it if the seal no longer meets the IP65 rating.

At what point does the 14/16 gauge carbon steel limit heat dissipation under sustained load?

The 14/16 gauge carbon steel relies on natural convection, so sustained high-wattage components may raise internal temperature beyond component ratings.

More in Electrical Boxes

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.