HOFFMAN
HOFFMAN A14N128 14.0 in H x 12.0 in W x 8.0 in D electrical box
Wall-mountable carbon-steel enclosure rated NEMA 1 and IP30, measuring 14.0 in high by 12.0 in wide by 8.0 in deep with a hinged solid cover secured by a 1/4-turn latch and slotted flush screws.
- TypeTraffic & Parking Lot
- Wall-mount ready with pre-drilled mounting holes
- Secure closure via 1/4-turn latch and slotted flush screw
- Durable 16 ga carbon steel with powder-coated gray finish
- NEMA 1 and IP30 rated for indoor protection
- 0 in H x 12.0 in W x 8.0 in D interior space
Wall-mount carbon-steel enclosure for indoor wiring
The HOFFMAN A14N128 is a NEMA 1 rated box built from 16 ga carbon steel with a powder-coated gray finish. It measures 14.0 in H x 12.0 in W x 8.0 in D and uses a hinged solid cover secured by a 1/4-turn latch. The unit is intended for indoor electrical junctions where IP30 protection is sufficient.
Check mounting surface
Verify the wall can accept the provided mounting holes and supplied screws for a secure fit. Confirm the hinged cover swing radius is unobstructed so the slotted flush screw and latch operate freely. Ensure the 8.0 in depth accommodates your wire fill and any internal panel without crowding the enclosure walls.
Included interior panel
The package supplies an interior panel referenced as 32FT08 plus the necessary mounting screws. Having the panel and fasteners in the box means the enclosure is ready for component layout immediately after mounting. The solid cover and latch system maintain the NEMA 1 seal once the panel is populated and the door is closed.
Highlights
- Wall-mount ready with pre-drilled mounting holes
- Secure closure via 1/4-turn latch and slotted flush screw
- Durable 16 ga carbon steel with powder-coated gray finish
- NEMA 1 and IP30 rated for indoor protection
- 0 in H x 12.0 in W x 8.0 in D interior space
Specifications
| Brand | HOFFMAN |
|---|---|
| Type | Traffic & Parking Lot |
Questions about this item
Does the box come with mounting hardware or an interior panel, or do I need to buy them separately?
The enclosure includes mounting screws and an interior panel designated 32FT08, so no separate panel or fasteners are required for basic installation.
Should I choose a different NEMA rating or material for outdoor use?
This model is NEMA 1 rated with an IP30 enclosure made of 16-gauge carbon steel, intended for dry indoor locations; outdoor or wet environments need a higher-rated enclosure.
What does the 14.0 in height, 12.0 in width and 8.0 in depth mean for component space?
The internal cavity measures 14 in high by 12 in wide by 8 in deep, providing room for terminal blocks, relays or small controllers mounted on the included panel.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Thomas & Betts TY523M Cable Tie 18lb 4in Natural Nylon Stainless Steel Locking Clip Pack 100
CALBRITE S60700FDCC Weatherproof Electrical Box 5.90" x 2.83" 25 cu in
- Electrical Boxes &…
HOFFMAN A12P10G Interior Panel Steel 10.75in H 8.88in W 14 Gauge
- Electrical Boxes &…



