HNZXIB
HNZXIB ZNCL-T5L 5L 110V Heating Mantle Magnetic Stirrer laboratory supply
Heats and magnetically stirs up to 5 L with digital temperature control to 350 °C and independent stirring up to 2000 rpm on 110 V power
- TypeHeating Plate/Mantle
- Temperature RangeRT~350°C
- Capacity5L
- Voltage110V
- Digital display with self-tuning for precise temperature control
- Independent stirring control up to 2000 rpm for thorough mixing
- Intelligent constant temperature via inner and outer sensors
- Separate switches for heating and stirring functions
- Gradual speed ramp-up to prevent splashing and improve coupling
5L Heating Mantle with Magnetic Stirring
The HNZXIB ZNCL-T5L is a 5000ml capacity heating mantle designed for laboratory use. It operates on 110V supply and combines heating with magnetic stirring in a single unit. The device suits technicians in biology, medicine, chemistry and chemical engineering who need simultaneous heating and mixing.
Independent Stirring and Temperature Control
Stirring and heating are managed by two separate switches. The stirrer offers variable speed up to 2000rpm with a slow-start ramp to improve coupling and reduce splashing. Intelligent temperature control uses inner and outer probes for ±1°C accuracy across a range up to 380°C, while the self-tuning function maintains stability during continuous runs.
Suited for 5L Batch Work at 110V
This mantle fits workflows requiring up to five litres of solvent heated to 380°C with magnetic agitation. It is not for users needing larger volumes, higher temperatures or 220V-only installations. Buyers who require integrated vacuum filtration or automated multi-step programmes should look at other equipment.
Highlights
- Digital display with self-tuning for precise temperature control
- Independent stirring control up to 2000 rpm for thorough mixing
- Intelligent constant temperature via inner and outer sensors
- Separate switches for heating and stirring functions
- Gradual speed ramp-up to prevent splashing and improve coupling
Specifications
| Type | Heating Plate/Mantle |
|---|---|
| Temperature Range | RT~350°C |
| Capacity | 5L |
| Voltage | 110V |
Questions about this item
How often will the Cr20Ni80 furnace wire need replacement with continuous 8-hour runs?
The Cr20Ni80 wire is rated for 450 °C insulation and designed for >8-hour continuous operation; typical lab mantles run hundreds of cycles before wire fatigue appears.
Which limit is reached first during sustained 350 °C operation — the 900 W heater or the E-glass fiber insulation?
The 900 W heater reaches its steady-state output well before the E-glass fiber approaches its 450 °C rating, so heating power is the practical ceiling.
What noise and heat should I expect when the mantle runs all day at 2000 rpm stirring?
The micro motor runs quietly at up to 2000 rpm; the outer housing stays warm but the E-glass fiber insulation keeps surface heat low during extended use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
