HNZXIB
HNZXIB ZNCL-BS Heating Plate Magnetic Stirrer 220V 260-750W 100-250rpm 50-10000ml
Heats and stirs volumes from 50 to 10000 ml at 100 to 250 rpm with temperature control up to 300 °C and ±1 °C accuracy
- TypeHeating Plate/Mantle
- Voltage220V
- Precise temperature control with ±1 °C accuracy up to 300 °C
- Independent heating and stirring functions for flexible workflows
- Wide volume range from 50 ml to 10000 ml capacity
- Stepless speed adjustment between 100 and 250 rpm
- Low-noise DC motor delivering 40 W at 14–24 V
ZNCL-BS Multi-Point Magnetic Stirrer
The ZNCL-BS is a laboratory heating plate and magnetic stirrer designed for simultaneous heating and mixing of liquid samples. It supports four-point or eight-point configurations to match workflow requirements. Independent controls allow the heating and stirring functions to operate separately. The unit accepts 220V or optional 110V supply.
Temperature Accuracy ±1°C up to 300°C
The critical specification is temperature accuracy of ±1°C across a range from room temperature to 300°C. SCR-based regulation delivers stable control for sensitive protocols. Stepless speed adjustment covers 100 to 250 rpm for gentle to vigorous mixing. Heating power scales from 260W to 750W to match vessel volume.
Sustained Operation at 10000 ml Capacity
Under continuous load the 40W DC motor maintains consistent torque across the 14 to 24V range while the heating plate manages thermal inertia up to the maximum 10000 ml stirring capacity. Low-noise operation persists during extended runs. Wooden case packaging protects the instrument during transit.
Highlights
- Precise temperature control with ±1 °C accuracy up to 300 °C
- Independent heating and stirring functions for flexible workflows
- Wide volume range from 50 ml to 10000 ml capacity
- Stepless speed adjustment between 100 and 250 rpm
- Low-noise DC motor delivering 40 W at 14–24 V
Specifications
| Type | Heating Plate/Mantle |
|---|---|
| Voltage | 220V |
Questions about this item
What does the 260-750 W heating power mean for a typical lab run?
It lets the plate reach up to 300 °C and hold temperature within ±1 °C, so you can heat 50-10 000 ml volumes without large overshoot.
How does the 220 V supply and SCR regulator limit actual performance?
The SCR controller adjusts power continuously on 220 V (110 V optional), capping output at the rated 750 W maximum and keeping temperature stable to ±1 °C.
What bench space and vessel sizes will the 100-250 rpm stirrer accommodate?
The unit handles 50-10 000 ml containers; speed is stepless from 100 to 250 rpm via a 40 W DC motor running on 14-24 V.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
