HNZXIB
HNZXIB WBFY201 Microwave Reactor 750 W 220 V 2450 MHz
Laboratory microwave reactor delivers 750 W output at 2450 MHz for accelerated chemical reactions with adjustable power and uniform volumetric heating
- TypeLab Chemicals
- 750 W microwave output accelerates reaction rates
- 2450 MHz frequency enables uniform volumetric heating
- 1100 W power consumption reduces energy usage versus conventional furnaces
- 330×365×235 mm chamber fits larger samples
- 8 A current draw suits standard 220 V laboratory circuits
Microwave Reactor for Laboratory Heating
The HNZXIB WBFY201 is a laboratory microwave reactor designed for chemical experiments that require fast, internal heating. It operates at a microwave frequency of 2450±50 MHz with a rated maximum output power of 750 W. The unit runs on 220 V supply voltage and draws a maximum input current of 7.8 A. Its internal cavity measures 330*365*235 mm to accommodate various reaction vessels.
Suited for chemists needing rapid thermal energy
This reactor suits researchers who want to accelerate reaction rates and improve yields through microwave absorption rather than conventional convection or conduction. It is not for users who require a standard domestic microwave oven for food preparation or general-purpose drying. Buyers needing higher output power or a different operating voltage should look at alternative equipment.
Key specification: 750 W microwave output
The single figure that decides suitability is the rated maximum output power of 750 W at 2450 MHz. This determines the energy delivered to the sample and the achievable heating rates for your specific chemical protocols. Verify that this power level matches the requirements of your intended reactions before purchase.
Highlights
- 750 W microwave output accelerates reaction rates
- 2450 MHz frequency enables uniform volumetric heating
- 1100 W power consumption reduces energy usage versus conventional furnaces
- 330×365×235 mm chamber fits larger samples
- 8 A current draw suits standard 220 V laboratory circuits
Specifications
| Type | Lab Chemicals |
|---|
Questions about this item
What power supply does the WBFY201 microwave reactor require?
The reactor operates on a 220 V supply and draws a maximum input current of 7.8 A, with a rated power consumption of 1100 W.
Will the 330 mm × 365 mm × 235 mm cavity accept my existing round-bottom flasks and beakers?
The internal chamber measures 330 mm wide, 365 mm deep and 235 mm high, so standard laboratory glassware that fits within those dimensions can be used.
How can I verify the reactor is delivering its rated 750 W at 2450 MHz after installation?
Run a calibrated water-load test; the temperature rise over a timed interval should match the 750 W microwave output at 2450±50 MHz specified for the WBFY201.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
