HNZXIB
HNZXIB S-50L 50L 110V Jacketed Glass Reactor laboratory supply
A 50 L double-layer glass reactor with 120 W stirring motor, 0–600 rpm speed range, PTFE agitator, and stainless-steel frame for vacuum or temperature-controlled reactions
- TypeGlass Reactor
- Capacity50L
- Voltage110V
- 50 L capacity handles large-volume synthesis
- 110 V 120 W motor delivers 0–600 rpm stirring up to 1300 rpm peak
- GG17 high-borosilicate glass resists chemical attack and thermal shock
- SUS304 stainless steel frame supports vacuum-jacketed heating or cooling cycles
- Bottom drain valve and wide mouth simplify product recovery and cleaning
50L Jacketed Glass Reactor
The HNZXIB S-50L is a 50-litre double-layer glass reactor designed for laboratory synthesis, bio-pharmaceutical work and new material preparation. It operates on a 110V 50/60Hz supply and uses an electric stir motor with a PTFE agitator and universal joint. The GG17 high-borosilicate glass construction provides high transparency for visual reaction monitoring and strong chemical resistance. A stainless steel SUS304 frame supports the vessel.
Replaces single-layer vessels
This reactor upgrades from single-wall glassware by adding a jacketed interlayer that circulates thermal media for precise heating or cooling. The jump is worth it when reactions require stable temperature control across a wide range, from high-temperature oil circulation to low-temperature freezing liquid cycles. The 120W gear motor delivers 0–600 rpm stirring with a maximum of 1300 rpm and 1500 g·cm torque, driven through a 12 mm shaft. A reserved glass thermometer casing allows direct solution temperature measurement.
Vacuum and thermal limits
The double-layer design enables stirring under vacuum or negative pressure in the inner layer while the jacket manages thermal transfer. Practical limits depend on the thermal medium used; hot oil, water or freezing liquid define the achievable temperature range. The bottom drain valve simplifies product release and cleaning, aided by the large bottle mouth. An LCD display assists temperature reading during operation.
Highlights
- 50 L capacity handles large-volume synthesis
- 110 V 120 W motor delivers 0–600 rpm stirring up to 1300 rpm peak
- GG17 high-borosilicate glass resists chemical attack and thermal shock
- SUS304 stainless steel frame supports vacuum-jacketed heating or cooling cycles
- Bottom drain valve and wide mouth simplify product recovery and cleaning
Specifications
| Type | Glass Reactor |
|---|---|
| Capacity | 50L |
| Voltage | 110V |
Questions about this item
What frame dimensions and floor clearance does the 50 L reactor require for the SUS304 stainless steel support?
The reactor ships on a SUS304 stainless steel frame; allow enough bench depth and height for the 50 L double-layer vessel plus stir motor and overhead clearance for the 12 mm shaft and universal joint.
Which steps are critical when assembling the PTFE agitator, 12 mm stirring shaft and universal joint onto the 120 W gear motor?
Mount the motor to the frame, insert the 12 mm shaft through the universal joint into the PTFE agitator, secure all clamps, then verify the LCD reads 0–600 rpm before applying vacuum to the jacket.
How often should the GG17 high-borosilicate glass vessel, PTFE agitator and bottom drain valve be inspected or replaced?
Inspect the glass for chips, the PTFE agitator for wear, and the drain valve seal after each thermal cycle; replace any component that shows cracking, deformation or leakage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
