HNZXIB
HNZXIB S-3L 3L Glass Reactor 110V 600 rpm laboratory supply
A 3 L jacketed glass reactor for vacuum stirring, heating or cooling reactions at up to 600 rpm with a PTFE agitator and bottom drain valve
- TypeGlass Reactor
- Capacity3L
- Voltage110V
- 3 L capacity suits small-batch synthesis
- 0–600 rpm range with 1300 rpm peak covers gentle to vigorous stirring
- GG17 high-borosilicate glass resists chemical attack and thermal shock
- Jacketed design circulates heating or cooling fluid for precise temperature control
- Bottom drain valve and wide mouth simplify product recovery and cleaning
3 L Jacketed Glass Reactor
This 3 L jacketed glass reactor is built for laboratory synthesis, biopharmaceutical work and new-material preparation. It handles vacuum or negative-pressure stirring in the inner vessel while the outer jacket circulates thermal fluid for heating or cooling.
GG17 borosilicate construction with floor stand
The vessel uses GG17 high-borosilicate glass for chemical resistance and clear reaction viewing. A floor-type frame supports the assembly, and the wide bottle mouth simplifies cleaning. An electric stir motor drives a PTFE agitator on a 12 mm shaft through a universal joint, while a bottom drain valve allows quick product discharge.
110 V supply with 0–600 rpm stirring range
The unit runs on 110 V 50/60 Hz and draws 60 W stirring power. Speed is adjustable from 0 to 600 rpm with a motor torque of 2400 g/cm, and the motor can reach a maximum of 1300 rpm. A reserved glass thermometer casing and LCD display let the operator monitor solution temperature during the run.
Highlights
- 3 L capacity suits small-batch synthesis
- 0–600 rpm range with 1300 rpm peak covers gentle to vigorous stirring
- GG17 high-borosilicate glass resists chemical attack and thermal shock
- Jacketed design circulates heating or cooling fluid for precise temperature control
- Bottom drain valve and wide mouth simplify product recovery and cleaning
Specifications
| Type | Glass Reactor |
|---|---|
| Capacity | 3L |
| Voltage | 110V |
Questions about this item
What is the maximum stirring speed the 110V motor can reach?
The motor runs from 0 to 600 rpm as standard, with a peak capability of 1300 rpm for short periods.
What clearance and floor space does the floor-type support need?
The reactor sits on a floor stand; allow enough bench or floor area for the 3 L vessel plus room to access the bottom drain valve.
How do I fit the PTFE agitator onto the 12 mm stirring shaft without damaging the glass?
Align the universal joint with the shaft, slide the PTFE agitator on gently, then tighten the coupling by hand — forcing it can crack the GG17 glass.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
