We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear glass double-layer reactor vessel with metal stir motor and PTFE agitator, floor-standing frame, 1L capacity

HNZXIB

HNZXIB S-1L 1L Jacketed Glass Reactor 220V laboratory supply

SKU CH-V541-3XYAR MPN S-1L

A 1 L jacketed glass reactor runs stirring reactions under vacuum while the double wall circulates heating or cooling fluid.

  • TypeGlass Reactor
  • Capacity1L
  • Voltage220V
  • 1 L capacity for small-scale synthesis
  • GG17 high-borosilicate glass resists thermal shock and chemicals
  • 60 W motor with 0–600 rpm range (max 1 300 rpm)
  • Jacketed design circulates heating or cooling fluids for temperature control
  • Bottom drain valve and wide mouth simplify product recovery and cleaning

1L Jacketed Glass Reactor for Lab Synthesis

The HNZXIB S-1L is a 1-litre double-layer glass reactor designed for laboratory synthesis, bio-pharmaceutical work and new-material preparation. It operates on a 220V 50/60Hz supply and uses GG17 high-borosilicate glass for chemical resistance. A 60W gear motor drives a PTFE agitator at speeds from 0 to 600 rpm with a maximum of 1300 rpm.

Suits vacuum stirring

This unit suits chemists who need vacuum stirring in the inner vessel while circulating heating or cooling fluid through the jacket. The floor-type frame, 12 mm stirring shaft and 2000 g/cm motor torque support viscous media. It is not for processes that require pressure-rated vessels beyond vacuum, automated programmable ramps or capacities larger than one litre.

Floor-standing assembly with standard glass joints

The reactor arrives as a floor-standing kit; the jacketed vessel, motor, PTFE agitator, universal joint, thermometer casing and bottom drain valve connect through standard ground-glass fittings. Users must supply their own circulator, vacuum pump and temperature controller. The large bottle mouth eases cleaning, while the LCD read-out shows stirring speed directly.

Highlights

  • 1 L capacity for small-scale synthesis
  • GG17 high-borosilicate glass resists thermal shock and chemicals
  • 60 W motor with 0–600 rpm range (max 1 300 rpm)
  • Jacketed design circulates heating or cooling fluids for temperature control
  • Bottom drain valve and wide mouth simplify product recovery and cleaning

Specifications

TypeGlass Reactor
Capacity1L
Voltage220V

Questions about this item

What power supply and stirrer mounting does the S-1L need to operate?

The reactor requires a 220V 50/60Hz mains supply and is floor-mounted; the 60W motor drives a 12mm stirring shaft through a universal joint.

Can the jacketed vessel run with an existing chiller or oil bath that the lab already owns?

Yes, the double-layer jacket accepts any circulating thermal medium — cooling water, freezing liquid or hot oil — to maintain constant temperature.

How do I confirm the stirrer and temperature readout are working correctly after setup?

The LCD shows the actual solution temperature while the motor speed readout confirms 0–600rpm operation; the PTFE agitator should turn smoothly without vibration.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.