HNZXIB
HNZXIB S-1L 1L Jacketed Glass Reactor 110V laboratory supply
A 1 L jacketed glass reactor for vacuum or negative-pressure stirring reactions with a 110 V motor running up to 600 rpm and a 12 mm shaft
- TypeGlass Reactor
- Capacity1L
- Voltage110V
- 1L capacity suits small-scale synthesis
- GG17 high-borosilicate glass resists chemical attack
- Jacketed design enables heating and cooling cycles
- Electric stir motor runs 0–600 rpm with 2000 g·cm torque
- 110 V 50/60 Hz supply fits standard lab power
Capacity and application
The HNZXIB S-1L is a 1L jacketed glass reactor designed for laboratory synthesis, biopharmaceutical work and new material preparation. It suits researchers who need a compact vessel for stirring reactions under vacuum or negative pressure.
Thermals and power in normal use
The double-layer GG17 high-borosilicate glass jacket circulates heating or cooling fluids to maintain constant temperature. A 60 W motor drives the PTFE agitator at speeds up to 600 rpm with 2000 g·cm torque on a 110 V 50/60 Hz supply.
Behaviour under sustained load
The motor can reach a maximum of 1300 rpm for short periods while the jacket efficiently removes reaction heat through continuous water or oil cycling. The floor-standing frame and bottom drain valve support extended runs and easy product recovery.
Highlights
- 1L capacity suits small-scale synthesis
- GG17 high-borosilicate glass resists chemical attack
- Jacketed design enables heating and cooling cycles
- Electric stir motor runs 0–600 rpm with 2000 g·cm torque
- 110 V 50/60 Hz supply fits standard lab power
Specifications
| Type | Glass Reactor |
|---|---|
| Capacity | 1L |
| Voltage | 110V |
Questions about this item
How is the PTFE agitator attached to the 12 mm stirring shaft and what alignment step is often missed?
The PTFE agitator connects to the 12 mm shaft via the universal joint; the step often missed is ensuring the joint is fully seated and the set screws are tightened before starting the motor.
Which components will need periodic replacement during long-term use of the 1 L jacketed reactor?
The PTFE agitator, shaft seals, bottom drain valve gaskets, and the glass thermometer casing are wear items that typically require replacement over time.
What operational limit appears first when the reactor runs continuously at the maximum 1300 rpm stirring speed?
Motor torque is rated at 2000 g/cm; sustained operation at 1300 rpm will reach this torque limit before temperature or vacuum limits are encountered.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
