HNZXIB
HNZXIB S-100L 100L 110V Jacketed Glass Reactor laboratory supply
A 100 L jacketed glass reactor with GG17 high-borosilicate glass, 110 V power, electric PTFE stirrer up to 600 rpm and stainless-steel frame for vacuum and temperature-controlled reactions
- TypeGlass Reactor
- Capacity100L
- Voltage110V
- 100 L capacity enables large-scale synthesis runs
- GG17 high-borosilicate glass resists thermal shock and chemical attack
- 0–600 rpm electric stir motor with 3000 g·cm torque ensures thorough mixing
- Jacketed design allows heating or cooling via circulated fluid
- SUS304 stainless-steel frame provides stable support for the vessel
100 L Jacketed Glass Reactor
The HNZXIB S-100L is a 100 L double-layer glass reactor designed for laboratory synthesis. It operates on a 110 V supply and uses GG17 high-borosilicate glass for chemical resistance. A 180 W gear motor drives a PTFE agitator at speeds up to 600 rpm. The stainless-steel frame supports the vessel and allows vacuum operation in the inner layer.
Suits temperature-controlled synthesis.
The jacketed design accepts hot oil, water or freezing liquid to heat or cool the reaction mass between ambient and elevated temperatures. It is built for synthetic chemistry, biopharmaceuticals and new-material preparation under vacuum or negative pressure. The vessel is not rated for positive-pressure reactions, so users needing pressurised capability should look elsewhere.
100 L working capacity
The reaction kettle holds 100 L of solution, which determines the batch size for each run. A 15 mm diameter stirring shaft transmits 3000 g·cm torque from the motor through a universal joint. The bottom drain valve allows product removal without disassembly. A reserved glass thermometer casing permits direct temperature monitoring during the process.
Highlights
- 100 L capacity enables large-scale synthesis runs
- GG17 high-borosilicate glass resists thermal shock and chemical attack
- 0–600 rpm electric stir motor with 3000 g·cm torque ensures thorough mixing
- Jacketed design allows heating or cooling via circulated fluid
- SUS304 stainless-steel frame provides stable support for the vessel
Specifications
| Type | Glass Reactor |
|---|---|
| Capacity | 100L |
| Voltage | 110V |
Questions about this item
What power supply must the lab already have for the 110 V reactor?
The unit requires a 110 V 50/60 Hz mains connection to run the 180 W stirring motor.
Will the 15 mm stirring shaft fit my existing PTFE agitators?
The shaft diameter is 15 mm, so any agitator or universal joint bored for 15 mm will mount directly.
How can I confirm the motor is delivering its rated torque after installation?
At the maximum 1300 rpm the gear motor should develop 3000 g·cm torque; watch the LCD speed readout and listen for smooth, stall-free stirring.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
