HNZXIB
HNZXIB RE501 Rotary Evaporator & -10°C/10L Chiller DLSB10/10 110V/60Hz
A 5 L rotary evaporator paired with a -10 °C / 10 L chiller for efficient solvent recovery, operating on 110 V / 60 Hz power
- TypeRotary Evaporator
- Capacity5L
- Voltage110V
- 5 L evaporating flask handles large solvent volumes
- Digital 0-120 r/min rotation with stepless speed control
- PTFE and fluoro rubber seals resist chemical corrosion
- Double backflow condenser maximises vapour recovery efficiency
- Includes -10 °C / 10 L chiller for low-temperature condensation
5L Rotary Evaporator & -10°C Chiller Set
This laboratory combination pairs a 5L rotary evaporator with a matching -10°C/10L refrigerated circulator. It suits chemists and biologists who need efficient solvent recovery and concentration at controlled temperatures. The system operates on 110V/60Hz power with a US plug for North American labs.
Manual Assembly With Glassware Care
The unit ships in a wooden crate and is described as easy to assemble, disassemble, operate and maintain. Installation requires fitting high borosilicate glass components, PTFE and fluoro rubber seals, and the screw-rod manual lift. The main risk is glass breakage during handling, which is excluded from the one-year coverage.
5L Evaporating Flask With Digital Speed Control
The evaporating flask holds 5L and the receiving flask holds 3L. Rotation speed is adjustable from 0 to 120 r/min with digital display, driven by a 40W stepless motor. This capacity and speed range determine throughput for distillation and purification workflows.
Highlights
- 5 L evaporating flask handles large solvent volumes
- Digital 0-120 r/min rotation with stepless speed control
- PTFE and fluoro rubber seals resist chemical corrosion
- Double backflow condenser maximises vapour recovery efficiency
- Includes -10 °C / 10 L chiller for low-temperature condensation
Specifications
| Type | Rotary Evaporator |
|---|---|
| Capacity | 5L |
| Voltage | 110V |
Questions about this item
How do I confirm the RE501 is running at the correct speed after setup?
Check the digital display; it should read between 0 and 120 r/min while the motor runs.
Which glassware pieces are included and which bath fluid must I supply?
The package includes a 5 L evaporating flask, a 3 L receiving flask and the double backflow condenser; you provide water or oil for the 28 × 17 cm bath.
Should I choose the 110 V or 220 V version for a US lab?
The 110 V/60 Hz model comes with a US plug and matches standard North American mains voltage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
