We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
HNZXIB RE-501 5L rotary evaporator set with chiller and vacuum pump

HNZXIB

HNZXIB RE-501 Rotary Evaporator 5L 220V/50Hz with Chiller DLSB10/10 and Vacuum Pump laboratory supply

SKU CH-QRD2-KTH6Z

A 5 L rotary evaporator with digital speed control to 120 r/min, a 1500 W water/oil bath, PTFE and fluoro rubber seals, and a double-backflow condenser.

  • TypeRotary Evaporator
  • Capacity5L
  • Voltage220V
  • High evaporation efficiency from 5 L flask and 120 r/min rotation
  • Digital speed display gives precise 0-120 r/min control
  • PTFE and fluoro rubber seals resist corrosion
  • 1500 W bath with ±1 °C accuracy ensures stable heating
  • Complete set includes chiller DLSB10/10 and vacuum pump SHZ-D(III)2TAP

Complete Laboratory System

The HNZXIB RE-501 is a 5L rotary evaporator kit supplied with a SHZ-D(III)2TAP vacuum pump and a DLSB10/10 chiller. It provides a single integrated setup for solvent distillation, concentration and purification in chemistry and biology laboratories. The package arrives in a safety wooden crate and includes a one-year warranty on non-glass components.

Sustained Operation Performance

The 1500W water or oil bath maintains temperature accuracy within ±1°C during extended runs. A 40W motor delivers stepless speed regulation from 0 to 120 r/min with digital display feedback. The double backflow condenser and PTFE plus fluoro rubber seals sustain a vacuum degree of 0.098Mpa for continuous high recovery rates. Manual screw-rod lifting offers 150mm of travel for stable flask positioning over long periods.

Decisive Specification

The evaporating flask capacity is 5000ml paired with a 3L receiving flask, defining the maximum batch volume per run. The bath interior measures 28cm diameter by 17cm depth, limiting vessel size. Operation requires a 220V 50Hz supply. Buyers needing larger single-batch throughput or a different mains voltage cannot use this configuration.

Highlights

  • High evaporation efficiency from 5 L flask and 120 r/min rotation
  • Digital speed display gives precise 0-120 r/min control
  • PTFE and fluoro rubber seals resist corrosion
  • 1500 W bath with ±1 °C accuracy ensures stable heating
  • Complete set includes chiller DLSB10/10 and vacuum pump SHZ-D(III)2TAP

Specifications

TypeRotary Evaporator
Capacity5L
Voltage220V

Questions about this item

How much motor power does the RE-501 draw during continuous all-day operation?

The motor is rated at 40W with stepless speed regulation from 0 to 120 r/min, so its electrical draw stays low even during extended runs.

What utilities must be on site before the RE-501 set can be commissioned?

You need a 220V/50Hz supply for the 1500W bath and pump, a water source for the DLSB10/10 chiller, and bench space for the 5L evaporating flask and 3L receiving flask.

Will the 5L evaporating flask and 3L receiving flask fit standard ground-glass joints on existing glassware?

Both flasks are high borosilicate with PTFE and fluoro rubber sealing, matching common joint dimensions used in laboratory distillation setups.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.