HNZXIB
HNZXIB RE-501 Factory Price 5L Rotary Evaporator 220V
A 5-litre rotary evaporator with a 40 W stepless motor, digital lift up to 150 mm and a 1500 W water-oil bath for vacuum distillation
- TypeRotary Evaporator
- Capacity5L
- Voltage220V
- 5 L evaporation capacity handles large batch volumes
- 0–120 rpm stepless speed control optimises solvent recovery
- ±1 °C temperature accuracy protects heat-sensitive compounds
- PTFE and fluoro-rubber seals resist aggressive chemicals
- Double backflow condenser improves condensation efficiency
5L Rotary Evaporator RE-501
The HNZXIB RE-501 is a 5L rotary evaporator built for laboratory distillation and solvent recovery. It suits chemists and technicians who need efficient concentration or purification of heat-sensitive biological samples. The unit operates on 220V power and includes a 5L evaporating flask with a 3L receiving flask.
Upgrades from smaller glassware or manual setups
Moving to this 5L capacity reduces the number of batches required for larger volumes compared to benchtop models below 2L. The stepless 0-120 r/min motor and digital display replace fixed-speed or analogue controls. The upgrade is worth it when throughput demands exceed what smaller flasks and manual lifts can sustain daily.
Handles 5L batches with 1500W bath power
The 1500W water/oil bath maintains temperature accuracy within ±1°C for consistent evaporation of 5L loads. Vacuum reaches 0.098M pa to lower boiling points, while the double backflow condenser and PTFE/fluoro rubber seals protect recovery rates. Headroom drops when volumes approach the 5L flask limit or when lifting travel beyond 150mm is required.
Highlights
- 5 L evaporation capacity handles large batch volumes
- 0–120 rpm stepless speed control optimises solvent recovery
- ±1 °C temperature accuracy protects heat-sensitive compounds
- PTFE and fluoro-rubber seals resist aggressive chemicals
- Double backflow condenser improves condensation efficiency
Specifications
| Type | Rotary Evaporator |
|---|---|
| Capacity | 5L |
| Voltage | 220V |
Questions about this item
What bench space does the water bath and lifting range require?
The water bath measures 28 cm in diameter and 17 cm deep, and the manual screw lift provides 0 to 150 mm of vertical travel, so allow clearance above and around those dimensions.
Which step is often missed when assembling the glassware and seals?
Users sometimes forget to fit both the PTFE and fluoro-rubber seals on every joint before tightening, which compromises the 0.098 MPa vacuum rating.
What consumables will need periodic replacement on the RE-501?
The PTFE and fluoro-rubber sealing rings, the high-borosilicate glass condenser and flasks, and the heating element in the 1500 W water-oil bath are the items that wear and require scheduled replacement.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
