HNZXIB
HNZXIB RE-501 5L Rotary Evaporator 110V with Vacuum Pump and Chiller
A 5-litre rotary evaporator with integrated vacuum pump and chiller operating from -20 °C to 99 °C on 110 V power
- TypeRotary Evaporator
- Capacity5L
- Voltage110V
- 5 L evaporation capacity for large batch processing
- Integrated vacuum pump reaches 0.098 MPa for efficient solvent removal
- Chiller spans -20 °C to 99 °C for precise temperature control
- PTFE and fluoro rubber seals resist chemical corrosion
- Digital speed control up to 120 r/min with ±1 °C bath accuracy
5L Rotary Evaporator System
The RE-501 package combines a 5-litre evaporating flask, 3-litre receiving flask, 2XZ-2 vacuum pump and DFY5/20 chiller on a single 110V supply. It is built for laboratory staff who need a complete distillation station for solvent recovery and concentration of heat-sensitive biological samples.
Glassware and Vacuum Limits
High borosilicate glass handles the thermal stress of water or oil bath heating up to 99°C. The PTFE and fluoro-rubber seals maintain a vacuum degree of 0.098 MPa, while the double backflow condenser provides the condensation surface required for efficient solvent recovery at that pressure.
Capacity and Temperature Headroom
The 1500W bath heats a 28 by 17 cm vessel with ±1°C accuracy across a -20°C to 99°C range set by the chiller. A 40W motor drives the flask from 0 to 120 r/min, and the 150 mm manual lift clears the bath for flask changes; beyond the 5L flask volume or the chiller's cooling capacity the system reaches its practical limit.
Highlights
- 5 L evaporation capacity for large batch processing
- Integrated vacuum pump reaches 0.098 MPa for efficient solvent removal
- Chiller spans -20 °C to 99 °C for precise temperature control
- PTFE and fluoro rubber seals resist chemical corrosion
- Digital speed control up to 120 r/min with ±1 °C bath accuracy
Specifications
| Type | Rotary Evaporator |
|---|---|
| Capacity | 5L |
| Voltage | 110V |
Questions about this item
Should I choose the 5 L evaporating flask or the 3 L receiving flask for my volume needs?
The evaporating flask holds 5 L of solvent while the receiving flask collects up to 3 L of condensate, so match the pair to your typical batch size and plan for multiple runs if volumes exceed 3 L.
What does the 0.098 MPa vacuum rating mean for daily distillation work?
At 0.098 MPa the system reaches roughly 98 % of atmospheric pressure, lowering solvent boiling points enough for gentle concentration of heat-sensitive compounds without oil-bath temperatures above 99 °C.
How does the 110 V / 60 Hz supply limit the heater and motor performance?
The 1500 W water-oil bath and 40 W stepless motor both run on the 110 V 60 Hz circuit, so heating speed and 0-120 r/min rotation are calibrated for that voltage; a 220 V option exists but requires a different power lead.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
